Festo Кабели и принадлежности - Manual (Page 75)

2. Fitting
2−19
Festo P.BE−SPC200−EN en 0901d
5. Tighten the screws. The fastening and the housing will
then be clamped firmly on the hat rail.
1
Fastening
2
Housing
3
M4x12 screw
4
Washer
5
Hat rail
1 2
3
4
5
Fig. 2/11: Fitting the SPC−FIO−2E/2A−M8 onto a hat rail
Proceed with dismantling as follows:
1. Loosen the screws.
2. Remove the housing.
3. Use a screwdriver to lift the fastening out of the hat rail.
1
Screwdriver
2
Fastening
1
2
Fig. 2/12: Dismantling the fastening