beautypg.com

Specifications – Panasonic 36PSU1U6 User Manual

Page 98

background image

1-92

1. Specifications

6-20. Duct for Fresh Air

There is a duct connection port (knock-out hole) at the

right-rear on the panel top of the indoor unit for drawing

in fresh air. If it is necessary to draw in fresh air, remove

the cover by knocking it out and connect the duct to the

indoor unit through the connection port. (Fig. 1-63)

If connection at the right-rear on the panel top is not

appropriate, another duct connection port can be made

by cutting an opening on the left side of the rear panel of

the indoor unit as shown in Fig. 1-64.

6-21. Installing the Drain Piping

Prepare a standard PVC pipe for the drain and

connect it to the indoor unit drain pipe with the

supplied hose clamps to prevent water leaks.

Connect the drain piping so that it slopes downward

from the unit to the outside. (Fig. 1-65)

Never allow traps to occur in the course of the piping.

Insulate any piping inside the room to prevent

dripping.

Use the supplied drain pipe to connect the drain pipe

with the drain outlet of the indoor unit.

After connecting the drain pipe securely, wrap the

supplied drain pipe insulator around the pipe, seal

the gap at the drain socket with the supplied black

insulation tape, then secure it with clamps.

(Fig. 1-66)

After the drain piping, pour water into the drain pan to

check that the water drains smoothly.

CAUTION

Check local electrical codes

and regulations before

obtaining wire. Also, check any

specified instruction or

limitations.

Duct connection port
(Knock-out hole)

Panel Top

Fig. 1-63

Cut this portion

A

B

4-11/32"

3-15/16"

Rear side

Right side

A

"

2

3

/

3

-

7

"

6

1

/

5

1

-

3

"

2

3

/

1

3

-

1

"

8

/

3

-

1

S-36PT1U6, S-42PT1U6

S-26PT1U6

B

Fig. 1-64

Good

Min. 1/100

Not good

Fig. 1-65

Drain hose
(supplied)

Packing

Side
softened

(supplied)

Drain hose
adapter
(supplied)

Drain pipe

Indoor
unit

clamp
(supplied)

Hard PVC pipe
(not supplied)

Adhere with
PVC adhesive.

Fig. 1-66

1

SM830203-01_PAC-i_US-letter.indb92 92

SM830203-01_PAC-i_US-letter.indb92 92

2012/01/19 22:39:32

2012/01/19 22:39:32