Sony PEG-SJ20 - Manual (Page 144)

Chapter 4 Communicating using your Sony CLIÉ Handheld
144
Exchanging data via Memory Stick
®
media
5
Tap COPY.
The Copy File dialog box is displayed.
6
Tap OK.
The data selected in step 4 is copied to the default folder (“/PALM/
PROGRAMS/MSFILES“) in Memory Stick media.
To copy all the data at once
Tap Select All in step 4.
To cancel the selection
• To cancel all the selections, tap Clear All.
• To clear only specific items, tap one selected item at a time.
To change the destination folder
Tap the arrow V in the upper right corner to select MS from the drop-down
list. The contents of Memory Stick media are listed.
Tap
or to select the destination folder. The folder display changes
and you can specify the destination folder.
You can only select a folder under the “PALM/PROGRAMS” or “PALM/
Launcher” folder. The other folders cannot be selected as destination.
Moving your CLIÉ handheld data to Memory Stick media
If your CLIÉ handheld is running out of memory space, move the data from
your CLIÉ handheld to Memory Stick media.
In step 5, tap Move.
The data on your CLIÉ handheld is deleted after being saved on Memory
Stick media.
Note
When a low battery error message is displayed while you are copying or moving data
from your CLIÉ handheld to Memory Stick media, data copying or moving may fail,
leaving invalid files in the Memory Stick media. If this occurs, replace the batteries with
new ones (PEG-SL10) or charge your CLIÉ handheld (PEG-SJ20/PEG-SJ30). Then try
copying or moving again. If an overwrite confirm message appears, tap Yes or Yes to all.