Accu-Chek insulin pump - Manual (Page 16)

Chapter 1: Understanding Your New System ACCU-CHEK Spirit Insulin Pump
15
Follow the steps below to navigate through the screens.
1. Press the d key to move to a screen displaying your first choice. Think
of these screens as menu choices.
2. Press the d key again to see your next choice on the menu. After you
reach the last menu choice you will “loop” back to the first menu choice.
3. When you reach the screen displaying the choice you want (e.g., SET THE
TIME AND DATE), press f. The next set of screens are called function
screens. They all relate to the choice you made. There may be only one
function screen or multiple screens.
4. Press the a or s key to increase or decrease the selected value. Or,
press the d key again to move to the next function screen you want to
change. After you reach the last function screen you will “loop” back to
the first function screen.
5. Press f to save your changes. The pump returns to the RUN or STOP
screen and the changes are saved.
STATUS Screen Messages, Beeps, and Vibrations
Beeps, vibrations, and messages on the display inform you of the status of
your insulin pump. Beeps and/or vibrations are used as alarm signals. Your
insulin pump also beeps when a key is pressed unless the beep volume is
turned off. The beep volume can be turned up or down.
Note:
The menu choices that appear depend on the menu that is selected.
Your pump can display a Standard, Advance, or Custom user menu.
See the section “User Menus” (page 99) for more information.
Pressing d + a simultaneously lets you move backwards in the
menu structure or to return to menus you just skipped. If you are
within a function screen, pressing
d+a simultaneously lets you
move up to the corresponding menu without saving the current changes.