IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 92)

PPC-5xxx-9455 Panel PC
Page 74
Enhanced D EFAULT Configures the on-board ATA/IDE controller to be in
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. Some legacy OS do not
support this mode.
Configure SATA as [IDE]
The “Configure SATA as” option sets the configuration of the SATA ports.
IDE D EFAULT The SATA drives are configured as IDE devices and no
enhanced functions are available
Configure SATA Channels [IDE]
The “Configure SATA Channels” option sets the order in which the IDE devices are
configured.
Before PATA D EFAULT The SATA drives are configured before the PATA drives
Behind PATA The SATA drives are configured after the PATA drives
Legacy IDE Channels [PATA Pri, SATA Sec]
SATA Only Only the SATA drives are enabled.
PATA Pri, SATA Sec D EFAULT The IDE drives are enabled on the Primary
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
PATA Pri., PATA Sec The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
PATA Only Only the PATA drives are enabled.
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu: