IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 101)

PPC-5xxx-9455 Panel PC
Page 83
IrDA Serial Port 2 mode is IrDA
ASK IR Serial Port 2 mode is ASK IR
Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.
Disabled No base address is assigned to the Parallel Port
378 D EFAULT Parallel Port I/O port address is 378
278 Parallel Port I/O port address is 278
3BC Parallel Port I/O port address is 3BC
Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Normal D EFAULT The normal parallel port mode is the standard mode
for parallel port operation.
Bi-directional Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.