IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 118)

PPC-5xxx-9455 Panel PC
Page 100
Disabled USB function support disabled
Enabled D EFAULT USB function support enabled
USB 2.0 Controller [Enabled]
Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller
Disabled USB 2.0 controller disabled
Enabled D EFAULT USB 2.0 controller enabled
Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support.
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not
become available until a USB compatible operating system is fully booted with all USB
drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB driver loaded onto the system.
Disabled Legacy USB support disabled
Enabled D EFAULT Legacy USB support enabled
Auto Legacy USB support disabled if no USB devices are
connected
USB 2.0 Controller Mode [FullSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
FullSpeed D EFAULT The controller is capable of operating at 12 Mb/s
HiSpeed The controller is capable of operating at 480 Mb/s