IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 152)

PPC-5xxx-9455 Panel PC
Page 134
Step 9: After the installation wizard finds the Gigabit Ethernet driver, the Hardware
Update Completed window appears (Figure 6-20).
Figure 6-20: Hardware Installation Complete
Step 10: Click F INISH to exit the installation wizard and complete the installation process. S te p 0 :
6.5 Audio Driver
To install the audio driver, the audio needs to be enabled in the BIOS and then the
software driver can be installed.
6.5.1 BIOS Setup
Step 1: Enter the BIOS setup. To do this, reboot the system and press D EL during POST.
Step 2: Go to the Southbridge Configuration menu. Set the Audio Controller option to
[auto].
Step 3: Press F10 to save the changes and exit the BIOS setup. The system reboots. S te p 0 :
6.5.2 Driver Installation
To install the audio driver please follow the steps below.