IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 106)

PPC-5xxx-9455 Panel PC
Page 88
The CPU Temp. Limit of OFF option can only be set if the FAN x Mode Setting option is
set to Automatic Mode. Use the CPU Temp. Limit of OFF option to select the CPU
temperature at which the cooling fan should automatically turn off. To select a value,
select the CPU Temp. Limit of OFF option and enter a decimal number between 000 and
127. The temperature range is specified below.
Minimum Value: 0°C
Maximum Value: 127°C
Temperature Limit of Start [025]
WARNING:
Setting this value too high may cause the fan to start only when the
CPU is at a high temperature and therefore cause the system to be
damaged.
The Temperature Limit of Start option can only be set if the FAN x Mode Setting option
is set to Automatic Mode. Use the Temperature Limit of Start option to select the CPU
temperature at which the cooling fan should automatically turn on. When the fan starts, it
rotates using the starting pulse width modulation (PWM) specified in the Fan Start PWM
option. To select a value, select the Temperature Limit of Start option and enter a
decimal number between 000 and 127. The temperature range is specified below.
Minimum Value: 0°C
Maximum Value: 127°C
Temperature Limit of Full [080]
WARNING:
Setting this value too high may cause the system to become too hot
and cause irreparable damage to the system.