IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 107)

PPC-5xxx-9455 Panel PC
Page 89
The Temperature Limit of Full option can only be set if the FAN x Mode Setting option
is set to Automatic Mode. Use the Temperature Limit of Full option to select the CPU
temperature at which the cooling will reach full speed. To select a value, select the
Temperature Limit of Full option and enter a decimal number between 000 and 127. The
temperature range is specified below.
Minimum Value: 0°C
Maximum Value: 127°C
Fan Start PWM [070]
The Fan Start PWM option can only be set if the FAN x Mode Setting option is set to
Automatic Mode. Use the Fan Start PWM option to select the PWM the fan starts to
rotate with after the temperature specified in the Temperature 3 Limit of Start is
exceeded. To select a value, select the Fan Start PWM option and enter a decimal
number between 000 and 127. The temperature range is specified below.
PWM Minimum Mode: 0
PWM Maximum Mode: 127
Slope PWM [4 PWM]
The Slope PWM option can only be set if the FAN x Mode Setting option is set to
Automatic Mode. Use the Slope PWM option to select the linear rate at which the PWM
mode increases with respect to an increase in temperature. A list of available options is
shown below:
0 PWM
1 PWM
2 PWM
4 PWM
8 PWM
16 PWM
32 PWM
64 PWM