Veris Technologies 3150 Soil EC Mapping System - Operating Instructions User Manual

Page 55

Text mode
Original mode

Pub. # OM17-EC

6-21

Figure 7.3

Hubs --Use good quality wheel bearing or lithium grease for lubrication, but we suggest that you
grease the hubs sparingly. Over-lubricating the hub will result in pre-mature seal failure, and an
excessive amount of grease in the hub cap/commutator. On an interval of 150 hours, 1-2 strokes
of grease should be sufficient.

Figure 7.4

grease zerk