Veris Technologies 3150 Soil EC Mapping System - Operating Instructions User Manual
Page 31
Pub. # OM17-EC
4-9
5. Perform Signal Testing Procedures #1 and #2:
at least once a day during mapping season
every 10 hours of mapping
after extended periods of non-use
whenever readings are questionable
6. Keep all electrical connections dirt and moisture-free
7. Limit speeds in rough or rocky field conditions. This will improve data quality, and will also
lengthen the service life of the implement components. NEVER EXCEED 15 M.P.H. FIELD
SPEED.
Remember, the EC data you generate will be used by your customers to make important
management decisions…take the time to make sure that it’s high quality data.