8e6 Technologies Enterprise Filter R3000IR User Manual

Page 39

6 R3000iR Q

uick

taRt

uide

D. Click

Apply.

Network: LAN Settings

From the navigation panel, click Network and choose LAN Settings from the pop-up

menu:

Make the following entries for the R3000 in the LAN Settings window:

A. Enter the

Host Name that includes your domain name, for example R3000SERVER.

myserver.com (the NetBIOS name must be capitalized). It is important to enter

something identifiable, because once the product is registered, this host name is

used by 8e6 Technologies to recognize your account for library updates. This name

needs to be a valid DNS entry.

B. Enter the

LAN1 IP address and specify the subnet for LAN 1, the R3000’s first Ether-

net Network Interface Card (NIC).

For the invisible mode, you may use a non-routeable IP address for the listening

interface and a subnet mask of 255.255.255.255 (32 bites).

C. Enter the

LAN2 IP address and subnet for LAN 2, the R3000’s second Ethernet NIC.

The subnet selection is usually 255.255.0.0 (16 bites) or 255.255.255.0 (24 bites),

but cannot be 255.255.255.255 (32 bites).

For the router or firewall mode, the LAN 1 IP address should be in a different subnet

than the LAN 2 IP address.