Rack mount instructions – 8e6 Technologies Enterprise Filter R3000IR User Manual

Page 11

6 R3000iR Q

uick

taRt

uide

Rack Mount Instructions

Optional: Install the Chassis Rails

NOTE: If your chassis does not come with chassis rails, please follow the

procedure listed on the last page of this sub-section to install the unit directly into

the rack.

CAUTION: Please make sure that the chassis covers and chassis rails are

installed on the chassis before you install the chassis into the rack. To avoid

personal injury and property damage, please carefully follow all the safety steps

listed below:

Before installing the chassis rails:

• Close the chassis using the chassis cover.

• Unplug the AC power cord(s).

• Remove all external devices and connectors.

1. Included in the shipping package are a pair of rail assemblies. In each rail assembly,

locate the inner rail and the outer rail.

2. Press the locking tab to release the inner rail from its locking position and pull out the

inner rail from the rail assembly.

NOTE: The inner rails are to be attached to the chassis and the outer rails

are to be installed in the rack.