8e6 Technologies Enterprise Filter R3000IR User Manual

Page 18

6 R3000iR Q

uick

taRt

uide

Install the Chassis into the Rack

CAUTION: Before installing the chassis into the rack:

• Make sure that the rack is securely anchored onto an unmovable surface or

structure before installing the chassis into the rack.

• Unplug power cord(s) of the rack before installing the chassis into the rack.

• Make sure that the system is adequately supported. Make sure that all the

components are securely fastened to the chassis to prevent components fall-

ing off from the chassis.

• The rack assembly should be properly grounded to avoid electric shock.

• The rack assembly must provide sufficient airflow to the chassis for proper

cooling.

• Please make sure that all components and all chassis covers are properly in-

stalled in the chassis before you install the chassis into the racks; otherwise,

out-of-warranty damage may occur.

Slide the chassis into the rack and secure it with two screws on each side of the rack as

shown in the picture.