How to use this guide – Netopia Router PN Series User Manual
Page 10

1-2
Reference Guide
How to use this guide
This guide is organized into chapters describing each of the Netopia
Router’s advanced features. You may want to read each chapter’s
introductory section to familiarize yourself with the various features
available.
You can also use this summary to locate relevant sections:
■
To configure ISDN setup parameters, see
.
■
To configure leased line setup parameters, see
.
■
To add or modify connection profiles, see
ISDN and Leased lines” on page 2-13
.
■
To configure the default profile for an ISDN or leased line, see
“Default profile” on page 2-39
■
To put the advanced configuration changes into effect,
“Restarting the system” on page 10-8
.
■
To manually establish a connection with an existing connection
profile, see
“Establishing a WAN Connection” on page 2-30
400 Netopia series
models only
■
To use the AppleTalk Update-Based Routing Protocol (AURP), see
■
To schedule regular or one-time connections, see
.
■
To configure dynamic IP address service (DHCP, MacIP, or
BOOTP), see
“IP address serving” on page 4-16
■
For testing network connections, see
to test a switched ISDN line, and
to test connections to IP hosts.