Panasonic AG-DVC60P - Manual (Page 71)

MENUS
71
The underlining indicates the factory setting.
AV IN/OUT SETUP screen
Item/
(Display
mode)
Description of settings
A. DUB
INPUT
(VCR) Use this to select the sound to be recorded
when performing audio dubbing.
MIC:
The sound of the internal microphone or
external microphone is recorded.
(P52)
A_IN:
The sound of the audio unit connected to
the AUDIO IN/OUT jack is recorded.
If audio dubbing is performed on a recording
which was made in the 48K (16-bit) audio
mode, the sound heard during shooting will
be overwritten and the dubbed sound
recorded in its place.
DV OUT
(VCR) Select the ON setting when converting analog
input signals into digital signals and output-
ting them from the DV connector.
OFF, ON
DISPLAY SETUP screen
Item/
(Display
mode)
Description of settings
ZEBRA
DETECT
(CAM) Use this to set the brightness level at which
the zebra patterns are to be displayed.
80%, 85%, 90%, 95%, 100%, 105%
VIDEO OUT
OSD
(CAM) (VCR) Select the ON setting to output the informa-
tion displayed on the screen together with the
signals from the VIDEO IN/OUT jack.
OFF, ON
DATE/TIME
(CAM) (VCR) Use this to set whether to display the date
and/or time on the screen and on the signals
that are output from the VIDEO IN/OUT jack.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The date and time are displayed.
• If any setting other than OFF is selected,
the time and/or date are displayed for the
signals that are output from the AV IN/
OUT jack, regardless of the setting
selected for the VIDEO OUT OSD item.
LEVEL
METER
(CAM) (VCR) Select ON to display the audio level meter on
the screen.
OFF, ON
DISPLAY
(CAM) (VCR) Use this to set the amount of information to
be displayed on the screen.
(P61)
OFF, PARTIAL, ALL
CAMERA
DATA
(VCR) With the ON setting, the camera settings
(vibration reduction, F-number, gain value
and white balance information) at the time of
shooting are displayed when the tape is
played back.
OFF, ON
When a tape on which the unit’s camera set-
tings has been recorded is played back on
another unit, the camera settings may not be
displayed properly.
LCD
BACKLIGHT
(CAM) (VCR) Use this to adjust the backlight of the LCD
monitor.
When HI is selected, the backlight is made
brighter than usual.
HI, NORMAL