Panasonic AG-DVC60P - Manual (Page 49)

EDITING
PLA
Y
BACK
49
Connecting external units
Headphones
Digital video equipment
melkbp
as S-VIDEO
IN/OUT VIDEO
IN/OUT CH1 CH2 AUDIO
IN/OUT
2
1
DV cable (option)
4-pin type
You cannot use the DV
cable at the same time as
an S cable with a lock.
• Before proceeding to connect or disconnect the DV cable (IEEE1394), be absolutely
sure to turn off the power of the units that are to be connected or disconnected using
this cable.
• Before proceeding to connect the unit which uses a 6-pin type of DV connector,
carefully check the shape of the connectors on the DV cable and unit. Connecting a
connector upside down may damage the parts inside the camera-recorder and
cause malfunctioning.
Always connect the DV cable to the unit with the 6-pin type DV connector first.
(1J2)
• When recording signals from an external unit, first check that video signals are supplied.
• While signals from an external unit are being recorded, do not operate the external unit or disconnect any of
its cables. This will stop the output, which may result in the signals not being recognized when recording is
resumed.
• You can connect a digital video unit equipped with a DV connector and digitally transfer video and audio sig-
nals as well as time codes and other information.
• When a DV cable has been connected to the DV connector, do not apply any strong external force as this may
damage the connector.
6-pin type 4-pin type