Displays in camera and vcr modes – Panasonic AG-DVC60P User Manual
Page 59
DIS
P
LA
YS
59
20. Shutter speed
The shutter speed used for shooting is displayed
here.
(P38)
21. White balance information
The white balance information is displayed here.
(P40, 41)
22. Manual focus control
“MF” is displayed here when the focus is controlled
manually.
23. Vibration reduction (
)
“
” is displayed here when the vibration reduction
function is used.
24. Digital zoom
This display appears when the digital zoom function
is used.
(P31)
25. Zoom position
The zoom position from Z00 (max. wide angle) to
Z99 (max. telephoto) is displayed here.
26. Operation control
The operation control mode of the camera-recorder
is displayed here.
No display : Auto mode
MNL
: Manual mode
: This is displayed while the AE lock
function is working.
(P36)
27. Zoom value
The zoom value is displayed here for several sec-
onds when it has been changed. “D” appears when
the digital zoom function is being used.
28. Operation mode displays
REC
: Recording
*
: Recording (for self-portraits)
PAUSE
: Recording standby
* h
: Recording standby (for self-portraits)
: Playback pause
STNDBY
: Standby (cylinder heads stopped)
A.DUB
: Audio dubbing standby
A/DUB o : Audio dubbing
o
: Playback
s (a) : Fast forward/cue (rewind/review)
(
) : Slow playback (slow playback in
reverse direction)
CHK
: Rec check
f (d) : Cue-up (cue-up in reverse direction)
(
) : Frame feed playback (frame feed
playback in reverse direction)
BLANK
: Blank search
×o/×s(×p/×a):
Variable-speed search (variable-
speed search in reverse directio
29. One-shot recording
An asterisk (
) appears when the camera-
recorder has been set up for frame feed recording.
It blinks in the shooting pause mode.
30. Counter
The following data is selected in turn each time the
COUNTER button is pressed.
0 : 00. 00:
Counter value
M 0 : 00. 00:
Counter value in counter memory mode
TC XX : XX : XX. XX:
Time code value. “TC
” appears when this
value cannot be read correctly from the tape.
UB XX XX XX XX:
User’s bit value. “UB
” appears when this
value cannot be read correctly from the tape.
31. Filename used
The name of the scene file used for the current
shooting is displayed here.
32. Effects and still display
WIPE: when the effect is set to WIPE
MIX: when the effect is set to MIX
STILL: when images are still (inverse display)
Displays in CAMERA and VCR modes
AE
LOCK
∗
∗
∗