beautypg.com

Backup recording, Switching to manual mode, Focusing – Panasonic AG-DVC60P User Manual

Page 37: P37), Switching to manual mode focusing, Sh ooting

background image

SH

OOTING

37

You can automatically record backups of the camera
images on an external unit

(P49) connected to the DV

connector.
Set the method used to control the external unit using
the DV CONTROL and DV CMD SEL items on the
OTHER FUNCTIONS screen.

(P72)

This camera-recorder enables you to switch over to the
manual mode, which enables you to perform the opera-
tions listed below manually.

• Focusing (P37)
• Shutter speed (P38)
• Iris (P39)
• Gain (P39)
• White balance (P40, 41)

With this camera-recorder, you can select either auto
focusing or manual focusing.
When the AUTO/MANUAL selector switch is set to
MANUAL and the FOCUS button is pressed, manual
focusing is selected and “MF” appears on the screen.
Use the focus ring to bring the subject into focus.
Press the FOCUS button again to switch back to auto
focusing.

The subject may not be in focus if you zoom out

(wide angle), manually focus on the subject and then
zoom in (telephoto).

To blur the background so that the subject stands out,

reduce the F-number (opening the iris) and focus.
Conversely, to obtain a greater depth of field so that
the object in front of and behind the subject are also
in focus, increase the F-number (closing the iris) and
focus.

Backup recording

Remember the following when you record back-
ups of images.

The menu item settings are retained in the memory

even when the power is turned off. This means that
if the camera-recorder is used with the settings for
backup recording still in effect, images on tapes in
any unit that has been connected may be overwrit-
ten.
If you have performed backup recording, check the
menu item settings before you operate the camera-
recorder.

If another AG-DVC60 is used as the external unit

for the backup recording, select “OFF” as the DV
CONTROL item setting for the external unit and
then set it to the VCR mode before use.

Backup recording may not work properly if two or

more external units are connected.

Make sure that the DV cable (IEEE 1394) used to

connect the external unit is not more than 4.5
meters long.

If "EXTERNAL DV DISCONNECT" appears, check

that the unit you have connected is ready to record
DV signals.

When backup recording is performed with “CHAIN”

selected as the DV CONTROL item setting, record-
ing will be started automatically by the backup unit
that has been set to the recording standby mode as
soon as the camera-recorder’s tape approaches its
end during shooting.

If any of the following operations are performed

when backup recording is performed with “EXT” or
“CHAIN” selected as the DV CONTROL item set-
ting, the pictures or sound recorded by the backup
unit may be disrupted.

Digital zoom (P31)

High-sensitivity

shooting

(P32)

Photo shot (P33)

Frame recording (P34)

Squeeze recording (P35)

Slow shutter speed (P38)

Switching to manual mode

Focusing

CH1

CH2

AUDIO LEVEL

REC

MODE CHK

SNS

OIS

ZEBRA

RESET

COUNTER

ZOOM SPEED

OFF/M

H

L

AUDIO IN

FRONT

REAR

CH1 CH2

MIC

MIC

LINE

RESET

FOCUS

USER 2

SEARCH

MANUAL

MENU

VOL/JOG

SEARCH

D.ZOOM

USER 3

STILL

WHITE BAL

AUTO

PUSH

SHUTTER/IRIS

Focus ring

FOCUS button

AUTO/MANUAL
selector switch