Kohler custom Bodyspa 116347-2 - Manual (Page 27)

116347Ć2Ć AA (A) 28 Kohler Co., Kohler, WI
LET'S GET STARTED
If you're like most people who install a Kohler Custom BodySpa, you can't wait to get in and try it out. You'll
soon find that the BodySpa features and controls are very easy to use, and offer you a safe and exciting
personal care adventure. There are a few things you should know before you start using your new Custom
BodySpa. Please spend a few minutes with these simple rules, and then you'll be ready to go.
S Remove all loose bathing items, such as soap bars,
shampoo bottles, and washcloths from the BodySpa
room. Make sure nothing is resting on the Waterfall
ledge.
S Remove your eyeglasses or contact lenses, and any
loose jewelry before entering the BodySpa room.
S Don't use shampoo, soap, or bubble bath in the
BodySpa water. Of course, you can freely use
shampoo and soap for showering before you fill the
footbath basin.
S Use the bath fill spout to fill the footbath basin with
tempered water to a level at least 3Ćinches above the
top of the suction cover.
S Close the door enclosure securely.
S Always stand clear of the water stream when you
turn on the BodySpa, or whenever you use the
keypad control to adjust the water flow. You should
also step into the WaterĆFree Zone anytime you
want to take a short break from the invigorating
effects of your hydroĆmassage experience.
S Use your hand to check the water temperature in
the footbath basin before you start up your Custom
BodySpa. Never fill the footbath with water that is
too hot (in excess of 104_ F).
S Press the Power key to turn on the BodySpa.
S When you turn on the BodySpa, it will take several
seconds for the water to begin flowing. Let the
water flow for several seconds before you enter the
water stream so the water temperature has a
chance to moderate.
S When you turn on the BodySpa, the water will start
to flow at its lowest setting. We suggest you increase
the water force gradually until you get used to the
intensity of the BodySpa experience. Press the Y or
B key on the keypad control to increase or decrease
the water flow.
S The Waterfall will automatically start when you
turn on the BodySpa. When you press the Body
Jets key, water will begin flowing from Body Jet
arrays 2, 3, and 4 at low speed. The Waterfall will
turn off. Toggle any of the number keys to turn on
or off the corresponding Body Jet arrays.
S The BodySpa will automatically shut off after about
20 minutes of continuous use. If you want to use
your BodySpa for more than one 20Ćminute cycle,
simply step into the WaterĆFree Zone and restart
the action by pressing the Power key.
S If you feel faint, dizzy, or lightheaded at any time
while using your BodySpa, immediately step into
the WaterĆFree Zone, turn off the unit by pressing
the Power key, and exit the room immediately.
S Press the Power key a second time to turn off the
BodySpa.
USER'S
INFORMA
TION
USER'S
INFORMA
TION