IBM Switch 9077 User Manual
Page 62

44
IBM 9077 SP Switch Router: Get Connected to the SP Switch
The
enadmin
command is used to change the administrative state of a
dependent node in the GRF; it has the following characteristics:
• It is part of the ssp.spmgr fileset.
• It must only be executed on the Control Workstation.
• It can only be executed by the root user.
• The
-r
option from
endefnode
and
endefadapter
triggers
enadmin -a
reconfigure
, while the
-r
option from
enrmnode
triggers
enadmin -a reset.
• The return code is 0 if successful, 1 if failed.
Table 6 shows the list of commands from the second group (executable by
any user on any standard node):
Table 6. New Commands (User Executable)
These commands have the following characteristics:
• They are part of the ssp.basic fileset.
• They can be executed on any standard RS/6000 SP node.
• They can be executed by any user.
• They only affect the current active partition unless the
-G
option is used.
The following sections describe the commands in more detail.
2.4.2.1 The endefnode Command
The
endefnode
command can be executed using smit. The fast path for smit is
enter_extnode
. This command is used to add or change an extension node in
the SDR DependentNode class. Its options are shown in Table 7 on page 45.
Command
Description
splstnodes
List SP nodes
splstadapters
List SP adapter