Iomega DataSafe Network Device - Manual (Page 84)

DataSafe NAS User’s Manual 79
FTP Logging
You can log incoming FTP connections in to the FTP log
by enabling
FTP Logging . By default, FTP logs are
stored in %WinDir%\System32\LogFilesMSFTPSVC1.
Administrators can access these files from their
workstation by either accessing an administrative
share (for example,
\\appliancename\C$\winnt\system32\logfiles\msftp
svc1) or by creating a new share for this folder.
To enable FTP Logging
1. On the primary menu bar, select Services .
2. On the secondary menu bar, select FTP .
—OR—
Select the
FTP Service option from the Object
Selection table, then click Properties .
The FTP Service Properties page (Figure 29)
displays.
Figure 29 FTP Service Properties
3. Select the Logging tab.
4. Check the Enable logging check box, then click
OK .
FTP Anonymous Access
Allowing anonymous access to the FTP server enables
users to connect with the user name anonymous (or
ftp, which is a synonym for anonymous). A password
is not necessary, but the user is prompted to supply