Infinite Peripherals SCOM-100 - Manual (Page 32)

SCOM-100, User guide 32
Cmd Description Syntax Comments
1253 Clear PID Control DI cmd,id id:1-4
1255 Set PID Control Set Point cmd,id,sp id:1-4, sp:-100000-100000
1260 Clear PID Control
Configuration
cmd,id id:1-4
1105 Set DI for device Status
control
cmd,m,n,v m:0-8, n:1-4, v:0-1
8.1.6 RTC & Time scheduling
Cmd Description Syntax Comments
1600 Set RTC Time cmd,d,m,y,h,m,s d: Day of month (1-31), m: Month
of year (1-12), y:Year, h:Hour,
m:Minutes, s:Seconds
1700 Set Time Schedule Day cmd,id,d,p1b-p1d,p2b-
p2d,…,
p8b-p8d
id:1-10, d:1-7 (1:Sun, 2:Mon, etc)
1701 Set Time Schedule
Duration Percent cmd,id,p id:1-10, p:0-100
1710 Clear Time Schedule cmd,id id:1-10
8.1.7 Monitoring commands
Cmd Description Syntax Comments
2000 Get Device Status cmd
2006 Get Device Software Version cmd
2300 Get Device Name cmd
2310 Get Device Description cmd
2500 Get User Info cmd
2600 Get Remaining SMS Alarm Limit cmd
2601 Get Remaining SMS Alarm Status cmd
2610 Get Verbose Responses cmd
2620 Get Acknowledge Status cmd
2630 Get Alarm Message Text cmd,id id:1-128
2650 Get Remaining SMS Counter cmd
2660 Get Alarm Merge Status cmd
2710 Get Available Alarm Message ID cmd
3000 Read DO cmd,m,n m:0-8, n:1-4 (base) or 1-2 (ext)
3050 Get DO settings cmd,m,n m:0-8, n:1-4 (base) or 1-2 (ext)
3100 Read DI cmd,m,n m:0-8, n:1-4
3110 Get DI Settings cmd,m,n m:0-8, n:1-4
3200 Read AI cmd,m,n m:0-4,
n:1-2 (base)
or 1-4 (ext)
3210 Get AI Settings cmd,m,n m:0-4, n:1-2 (base) or 1-4 (ext)
3250 Get ON/OFF - PID Settings cmd,id id:1-4