Infinite Peripherals SCOM-100 - Manual (Page 3)

SCOM-100, User guide 3
Contents
1. Device overview 5
1.1 Connections
1.2 LED indications
2. Wiring 6
2.1 Power supply
2.2 Digital inputs
2.3 Digital outputs
2.4 Analog inputs
2.4.1 Analog input 1
2.4.2 Analog input 2
2.5 I/O expansion power supply
2.6 GSM antenna
3. Getting started 10
3.1 Preparing a SIM card
3.2 Installing the SIM card
3.3 First power up & factory settings
4. Device operation 11
4.1 SMS commands
4.2 Naming the unit
4.3 Configuring a digital input for alarming
4.3.1 Setting alarm message’s texts
4.3.2 Clearing the digital input configuration
4.4 Controlling the digital outputs
4.4.1 Setting a digital output
4.4.2 Resetting a digital output
4.4.3 Configuring a digital output as a closed contact
4.4.4 Pulse digital output
4.4.5 Setting a digital output after a delay
4.4.6 Resetting a digital output after a delay
4.4.7 Digital output time based scheduling
4.4.8 Clearing the digital output configuration
4.5 Analog signal alarming
4.5.1 Analog input configuration
4.5.2 Setting alarm message’s texts for analog inputs
4.5.3 Clearing the analog input configuration
4.6 Special I/O Functions
4.6.1 ON/OFF and PID control
5. User administration 22
5.1 Create a new user
5.2 Change user configuration
5.3 Remove a user