Infinite Peripherals SCOM-100 - Manual (Page 25)

SCOM-100, User guide 25
Note: In the case of a rejected command, the error response SMS is always being
sent.
The acknowledgement SMS can be restored using the command:
0620
6.3.2 Response format
The device acknowledgement SMS can be in verbose or brief format. The verbose
format is informative text and is recommended for man to machine applications. Brief
format is a briefly coded format for use in machine-to-machine applications. Verbose
acknowledgement can be cancelled using the command:
0611
The verbose acknowledgement can be restored using the command:
0610
6.3.3 Merge concurrent alarms
The device can send a separate SMS for each alarm or merge concurrent alarms in
one SMS. Alarm merging can be applied using by the command:
0660
Alarm unmerging can be applied using the command:
0661
6.4 Setting up an SMS counter
An SMS counter can be activated for counting down available SMS transmissions. A
preset limit can be set for user alarming when the limit is reached.
The counter can be set to a number of remaining SMS messages using command:.
0650,v
0650: Command ID
v: Remaining SMS number (0-4294967295)
Remaining SMS messages limit reach will be acknowledged to users if a limit is set
using command:
0600,l
0600: Command ID
l: Remaining SMS alarm limit (0-4294967295)
Remaining SMS alarm annunciation can be cancelled using the command:
0601
6.5 Setting date and time
The device real time clock (RTC) can be set through the following command:
1600,d,m,y,h,m,s
1600: Command ID
d: Day of the month (1-31)
m: Month of the year (1-12)
y: Year
h: Hour
m: Minutes
s Seconds