Backup & restore, Saving changes and logging out, Accessing a target server – Minicom Advanced Systems Minicom Smart 216 User Manual
Page 29

USER GUIDE
28
24. Backup & Restore
You can backup all configuration data and restore it at a later date. To do so:
From the menu select Backup & Restore, Figure 27 appears.
Figure 27 Backup & Restore
To backup the configuration data, click
. And save the file.
To restore the configuration data, browse to locate the file and press Apply, the
device restarts.
25. Saving changes and logging out
To save any configuration changes click the relevant button on the current page.
This could be
or just
.
To restart the Smart 216 / 232 IP press
.
To exit the Configuration menu and close the session, click
.
Only one Administrator can log into the Configuration area at a time. After the idle
Timeout – see section
18 page 23 – the session terminates.
26. Accessing a Target server
Log in to the web interface as explained on page 13. The web interface opens at the
Targets page, see Figure 14 on page 14. To connect to a Target or serial device,
click the desired Target/device in the Server Name Column. (A server being used
by another user cannot be accessed). The screen of the Target/device appears inside
a remote console window. Note! For a User, only permitted Targets appear on the
Targets page. Figure 28 illustrates the remote console window.