1 connecting a roc ps/2, 2 connecting a roc usb, User guide – Minicom Advanced Systems Minicom Smart 216 User Manual
Page 11: Figure 8 roc usb, Figure 9 roc ps/2 connections
USER GUIDE
10
To computer’s
USB Port
To computer’s
Video Card
Figure 8 ROC USB
9.1.1 Connecting a ROC PS/2
Figure 9 illustrates the ROC PS/2 connections.
You can connect the ROC PS/2 to a powered on computer, but it must be in the
following order:
1. Connect the Mouse connector to the computer’s Mouse port.
2. Connect the Keyboard connector to the computer’s Keyboard port.
3. Connect the Screen connector to the computer’s Video port.
Failure to connect in the above order while the server is running, may lead to the
mouse malfunctioning until the server is rebooted.
To Keyboard port
CAT5 cable to switch
Server port
To Mouse port
To Video port
ROC PS/2
K
e
yb
d
M
o
u
se
1
0
0
T
V
id
e
o
S
e
ria
l A
P
ar
all
el
PCI 33Mx32b
PCI 33Mx32b
PCI 33Mx32b
PCI 33Mx32b
S
e
ria
l B
SCSI
Figure 9 ROC PS/2 connections
9.1.2 Connecting a ROC USB
The ROC USB supports Windows 98 SE and later, MAC, SUN and SGI, and all
modern Linux distributions. Figure 10 illustrates the ROC USB and its connections.