Minicom Advanced Systems Minicom Smart 216 - Manual (Page 24)

SMART 216 / 232 IP
23
18. Security > Settings
Configure the security features, such as Account Blocking, Password Policy, Idle
Timeout and Serial Terminal Policy, as explained below.
From the Security section click Settings, the Security Settings appear, see Figure
21.
Figure 21 Security Settings
The Security Settings fields:
Account Blocking – decide on the number of attempts to login with a wrong
username or password after which there is a time lock or a total block.
Password Policy
For local and remote users you have the option of a standard or high security level
of password. The table below shows the parameters of the 2 options.
Standard security policy High security policy
6 characters or more 8 characters or more must include at least 1 digit
and 1 upper case letter and 1 “special” character
as follows !@#$%^*()_-+=[]’:;?/{}
Must not include the user name Must not include the user name
Check the box to enable the high security password policy. Unchecked, the
standard security policy applies.