Minicom Advanced Systems Minicom Smart 216 - Manual (Page 21)

USER GUIDE
20
15. Administration > Power Management
Where you have a Minicom Serial Remote Power Switch (SRPS), connect it to the
Serial 1 port of the Smart 216 / 232 IP.
Configure the Power Management switch as follows:
1. From the menu, click Power Management. The Power Management window
appears, see Figure 17.
Figure 18 Power Management
2. Select the number of sockets on the power management switch in the Number
of Sockets drop-down menu.
3. Click . The appropriate number of Managed by Sockets and
Server name drop-down menus appear.
4. Select the PDU type (currently only Minicom SRPS is supported).
5. Match the sockets to the servers. For each socket select the server name
connected to it from the drop-down menu.
When you want to power manage the servers with double or more power supplies,
you need to assign multiple sockets to the same KVM port.