ZyXEL Communications P-630-S Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for P-630-S ZyXEL Communications
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 32 |
| Size: | 3.40 MB |
Show table of contents
Document Outline
- P-630-S
- Overview
- 1 Installing the USB Driver
- 1.1 Windows
- 1 Close all Windows programs and applications.
- 2 Insert the CD that came with your P-630-S into the CD- ROM of your computer. The main screen displays as shown. If the screen ...
- 3 Wait until you are prompted to connect your P-630-S's USB cable to the computer.
- 4 When the installation is complete, you will see this window. Click OK to close the wizard.
- 5 Connect the P-630-S’s DSL port to a telephone jack using the included telephone wire.
- 1.2 Mac
- 1 Close all programs and applications.
- 2 Insert the included CD into the CD-ROM drive. An icon for the CD appears. Double-click the CD's icon.
- 3 Double-click the Mac OS 9 driver folder.
- 4 Double-click the .sit file.
- 5 The file ADSLModem.smi will be created. Double- click ADSLModem.smi.
- 6 The ADSLModem icon will display on the desktop. Double-click ADSLModem.
- 7 Double-click Driver.
- 8 Double-click Installation of ADSL Modem to install the driver.
- 9 Click Switch Disk to select a destination (this must be on an actual physical hard drive on the Macintosh, not a virtual drive) and click Install.
- 10 Click Restart to reboot your computer and complete the driver installation.
- 11 Connect the USB cable to a USB port on your computer. Connect the P- 630-S’s DSL port to a telephone jack using the included telephone wire.
- 1 Close all programs and applications.
- 2 Insert the included CD into the CD-ROM drive. An icon for the CD appears. Double-click the CD's icon.
- 3 Double-click the driver folder specific to your Mac operating system .
- 4 Double-click the .hqx file.
- 5 The file ADSLModem.pk g will be created. Double-click ADSLModem.pk g to install the driver.
- 6 A welcome screen appears. Click Continue.
- 7 Click Continue.
- 8 A screen displays asking you to agree to the license agreement. Click Agree.
- 9 You will then see the Select a Destination screen, select a destination (this must be on an actual physical hard drive on the Macintosh, not a virtual drive) and click Continue.
- 10 Click Upgrade.
- 11 You then see a screen telling you that you must restart the computer after the installation completes. Click Continue Installation. The driver will automatically install.
- 12 Click Restart to reboot your computer and complete the driver installation.
- 13 Connect the USB cable to a USB port on your computer. Connect the P- 630-S’s DSL port to a telephone jack using the included telephone wire.
- 1.1 Windows
- 2 Accessing the Internet
- 2.1 PPPoA or PPPoE Dial-up Connection
- 2.1.1 Windows
- 1 After you install the driver and the P-630-S, the ADSL status icon will appear in the system tray.
- 2 Double-click the icon to display the configuration wizard and select the Setup tab. Select a PPPoE or PPPoA profile and click Reinstall.
- 3 The dial-up icon appears on your desktop.
- 4 Double-click the icon to configure your user name and password for Internet access. Enter the user name and password that your ISP gave you and click Dial.
- 2.1.2 Mac
- 1 Click the Apple icon, Control Panels and ADSL Modem to start the configuration wizard.
- 2 Click the Config tab, select a profile and click Save.
- 3 Click the Apple icon, Control Panels and TCP/IP.
- 4 In the TCP/IP screen, select PPP in the Connect via field.
- 5 Click the Apple icon, Control Panels and Modem.
- 6 Select PPPoA ADSL modem or PPPoE ADSL modem in the Connect via field and ADSL Modem Script in the Modem field.
- 7 Click the Apple icon, Control Panels and Remote Access.
- 8 Select Registered User, enter the user name and password that your ISP gave you, enter any number in the Number field and click Connect.
- 1 Click Finder, Applications and ADSL Modem.
- 2 Double-click ADSL Modem to start the configuration wizard.
- 3 Click the Config tab, select a PPPoE or PPPoA profile and click Save.
- 4 Click the Apple icon and System Preferences.
- 5 Double-click Network.
- 6 A New Port Detected screen opens when the computer detects that the ADSL link is up. Click OK.
- 7 In the Network screen, select Ethernet Adaptor (en x) in the Show field. Click the PPPoE tab and select the Connect using PPPo...
- 8 Click the PPPoE status menu bar icon at the right corner and select Connect.
- 2.1.1 Windows
- 2.2 Setting up Your Computer’s IP Address
- 2.2.1 Windows
- 1 Click Start, Control Panel and Network Connections.
- 2 Right-click on the icon that corresponds to your new USB connection (not the one that corresponds to your network card) and select Properties.
- 3 In the Properties screen, make sure the Connect using field displays "LAN/ATM/ ADSL miniport". Select Internet Protocol (TCP/IP) and click Properties.
- 4 Click Use the following IP Address and fill in the IP address, Subnet mask and Default gateway (given by your ISP) fields. Click OK.
- 2.2.2 Mac
- 1 Click the Apple icon, Control Panels and TCP/IP.
- 2 In the TCP/IP screen, select PPP, Routed ADSL Modem or Bridged ADSL Modem in the Connect via field and Manually in the Configure field. Fill in the IP address, Subnet mask and Router address (given by your ISP) fields.
- 1 Click the Apple icon, System Preferences and Network to open the Network screen.
- 2 Select Ethernet Adaptor (en x) that corresponds to your new USB connection in the Show field. Click the TCP/IP tab and select ...
- 2.2.1 Windows
- 2.1 PPPoA or PPPoE Dial-up Connection
- 3 Troubleshooting
- Viewing Your Product’s Certifications