ZyXEL Communications P-630-S - Manual (Page 32)

P-630-S Series Quick Start Guide
32
Viewing Your Product’s Certifications
1 Go to www.zyxel.com .
2 Select your product from the drop-down list box on the ZyXEL home
page to go to that product's page.
3 Select the certification you wish to view from this page.
Windows
does not
auto-detect
the USB
connection to
the modem. Make sure the P-630-S is turned on and connected to the USB
port on the computer.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the P-630-S
and install the driver.
Check for possible hardware conflicts. In Windows, click Start,
Settings, Control Panel, System, Hardware and then click
Device Manager. Verify the status of the P-630-S under
Network Adapters. (Steps may vary depending on the
version of Windows).
Connect the P-630-S to another computer. If the error persists,
you may have a hardware problem. In this case, you should
contact your local vendor.
PROBLEM CORRECTIVE ACTION