HP Designjet 4020 Printer series Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for Designjet 4020 Printer series HP
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 235 |
| Size: | 10.03 MB |
Show table of contents
Document Outline
- Introduction
- How do I... (software setup topics)
- How do I... (printer operation topics)
- Switch on and off
- Restart
- Change the language of the front panel
- Access the Embedded Web Server
- Change the language of the Embedded Web Server
- Password-protect the Embedded Web Server
- Request E-mail notification of specific error conditions
- Set the date and time
- Change the sleep mode setting
- Turn off the buzzer
- Change the front panel contrast
- Change the units of measurement
- Adjust for altitude
- How do I... (paper topics)
- Load a roll onto the spindle [4020]
- Load a roll into the printer [4020]
- Unload a roll from the printer [4020]
- Load a single sheet [4020]
- Unload a single sheet [4020]
- Load a roll onto the spindle [4520]
- Load a roll into the printer [4520]
- Unload a roll from the printer [4520]
- Trim the paper with the manual cutter [4520]
- View information about the paper
- Download media profiles
- Use non-HP paper
- Cancel the drying time
- Change the drying time
- How do I... (print job topics)
- How do I... (stacker topics) [4520]
- How do I... (image adjustment topics)
- Change the page size
- Create a custom page size
- Change the print quality
- Choose print quality settings
- Print at maximum speed
- Adjust the margins
- Print on oversize pages
- Print without added margins
- Select the orientation of the image
- Rotate an image
- Print a mirror image
- Scale an image
- Change the palette settings
- Change the treatment of overlapping lines
- Change the graphic language setting
- How do I... (color topics)
- Perform color calibration
- Perform black point compensation
- Set the rendering intent
- Select the color emulation mode
- Produce matching prints from different HP Designjets
- Get accurate colors from Adobe Photoshop CS (HP–GL/2 & RTL driver)
- Get accurate colors from Adobe Photoshop CS (PostScript driver)
- Get accurate colors from Adobe InDesign CS
- Get accurate colors from QuarkXPress 6
- Get accurate colors from Autodesk AutoCAD
- Get accurate colors from Microsoft Office 2003
- Get accurate colors from ESRI ArcGIS 9
- How do I... (ink system topics)
- Remove an ink cartridge
- Insert an ink cartridge
- Remove a printhead
- Insert a printhead
- Manage printhead monitoring
- Recover (clean) the printheads
- Clean a printhead's electrical connections
- Align the printheads
- Remove a printhead cleaner
- Insert a printhead cleaner
- Check the status of the ink system
- Get ink cartridge statistics
- Get printhead statistics
- How do I... (accounting topics)
- How do I... (printer maintenance topics)
- How do I... (Image Diagnostics Print topics)
- How do I... (paper advance calibration topics)
- The problem is... (paper topics)
- The paper cannot be loaded successfully [4020]
- The paper cannot be loaded successfully [4520]
- A paper jam (paper stuck in the printer) [4020]
- A paper jam (paper stuck in the printer) [4520]
- A paper jam in drawer 2 [4520]
- Prints do not stack properly in the bin
- The printer uses a lot of paper to align the printheads
- The paper moves while the printer is in standby mode [4520]
- The printer unloads or trims the paper after a long period of disuse [4520]
- The printer unloads the paper while switched off [4520]
- The printer unloads the paper when switched on [4520]
- The problem is... (print quality topics)
- General advice
- Banding (horizontal lines across the image)
- Lines are missing or thinner than expected
- Solid bands or lines printed over the image
- Graininess
- The paper is not flat
- The print smudges when touched
- Ink marks on the paper
- A defect near the start of a print
- Lines are stepped
- Lines are printed double or in wrong colors
- Lines are discontinuous
- Lines are blurred (ink bleeds from lines)
- Lines are slightly warped
- Color accuracy
- PANTONE color accuracy
- Color matching between different HP Designjets
- Improving gray neutrality
- The problem is... (image error topics)
- The print is completely blank
- The output contains only a partial print
- The image is clipped
- The image is in one portion of the printing area
- The image is unexpectedly rotated
- The print is a mirror image of the original
- The print is distorted or unintelligible
- One image overlays another on the same sheet
- Pen settings seem to have no effect
- Some objects are missing from the printed image
- A PDF file is clipped or objects are missing
- No output when printing from Microsoft Visio 2003
- The problem is... (ink system topics)
- I cannot insert an ink cartridge
- The printer will not accept a large black ink cartridge
- I cannot remove an ink cartridge
- I cannot insert a printhead
- I cannot insert a printhead cleaner
- The front panel keeps telling me to reseat or replace a printhead
- An ink cartridge status message
- A printhead status message
- A printhead cleaner status message
- The problem is... (stacker topics) [4520]
- The problem is... (other topics)
- The printer's start-up process does not complete
- A front panel message
- A “printhead monitoring” message
- A “printheads are limiting performance” message
- An “on hold for paper” message [4520]
- Which criteria are used to decide to which roll a job will be printed?
- When is a job put on hold for paper?
- If I load a new roll of paper, will jobs that were on hold for paper be automatically printed?
- I don’t like jobs being put on hold for paper. Can I prevent it?
- I set the option “Enable on hold for paper” to Never, but some jobs are still put on hold
- My job is exactly as wide as the roll of paper that is loaded on the printer, but is put on hold for ...
- The printer does not print
- The printer seems slow
- The application slows down or hangs up while generating the print job
- Communication failures between computer and printer
- I cannot access the Embedded Web Server from my browser
- An out-of-memory error
- An AutoCAD 2000 memory allocation error
- The platen rollers squeak
- Tell me about... (Embedded Web Server topics)
- Tell me about... (printer topics)
- Tell me about... (ink system topics)
- Tell me about... (paper topics)
- Tell me about... (multiroll topics) [4520]
- Tell me about... (printer specifications topics)
- Tell me about... (ordering supplies and accessories topics)
- Tell me about... (getting help topics)
- Index