Document Outline

• CONTENTS
• C01759-1.pdf
  • CFN SYSTEM
    • SYSTEM OVERVIEW
    • SITE CONTROLLER I SYSTEM LAYOUT
    • SITE CONTROLLER II SYSTEM LAYOUT WITH CHECKPOINT
    • SITE CONTROLLER II SYSTEM LAYOUT WITH PROFIT POINT
    • RS-485 WIRING FOR SC I AND SC II
    • ABOUT THIS BOOK
    • USING THE PROBLEMS SECTION
    • TERMS USED IN THIS BOOK
• C01759-2.pdf
  • SITE CONTROLLER I
    • DESCRIPTION
    • WIRING
      • Connectors
        • AC Power
        • RS-232 - Local Communications Port
        • RS-232 - Remote Communications Port
        • RS-485 - PCU/RT Communications Port
        • RS-485 - Console Communications Port
      • Chassis Wiring
    • SITE CONTROLLER CPU PCB
      • • Site Controller CPU (C04835)
        • Site Controller Memory Plus CPU (C04940)
        • Site Controller I CPU - 512K (C05820)
      • Layout - Site Controller Memory Plus CPU PCB (C04940)
      • Layout - Site Controller I CPU - 512K PCB (C05820)
      • LED Indicators
      • Connectors
        • P1 - RS-485 Disable
        • P2 - RS-485 PCU/RT Communications Port
        • P3 - RS-485 Console Communications Port
        • P4 - RS-232 Remote Communications Port
        • P5 - RS-232 Local Communications Port
        • P7 - AC Power Sense Input
        • P8 - DC Power Input
        • P9 - Memory PCB Interface
        • P10 - Manager's Keyswitch
      • Jumpers
        • Site Controller Memory Plus CPU PCB
        • Site Controller I CPU - 512K PCB
      • Switches
        • SW1 - Reset Switch
        • SW2 - Address Switches
        • SW3 - Baud Rate Switches
        • Miscellaneous Switches
        • SW5 - Pulser/Pump Changes Switch
        • Manager's Keyswitch
      • Test Points - CPU PCB
    • SITE CONTROLLER MEMORY PCB
      • • Site Controller Memory PCB (C04837)
        • Site Controller II 128K (C02117)
        • Site Controller II 512K (C08331)
        • Site Controller II PCMCIA 760K (C06731)
      • Site Controller Memory PCB Layout (C04837)
      • Site Controller II Memory PCB Layout (C02117: U14 - 31 contains 8K chips)
      • Site Controller PCMCIA Memory PCB Layout (C06731)
      • Connector
        • P1 - CPU PCB Interface
      • LED Indicators (C04837, C02117, C08331)
      • Jumpers - Site Controller Memory PCB (C04837)
        • Battery Power - RAM Selection
      • Jumpers - Site Controller II Memory PCB (C02117 & C08331)
        • CPU PCB Type
        • Battery Power Enable
      • Jumpers - Site Controller PCMCIA Memory PCB (C06731)
        • Memory Settings
      • Switches - Site Controller Memory PCB (C04837)
        • SW1 - Battery Power Enable Switches
        • SW2 - Battery Power to CPU PCB Switch
      • Switches - Site Controller II Memory PCB (C02117 & C08331)
        • SW1 - Battery Enable Switches
        • SW2 - Battery Power to CPU PCB Switch
      • Switches - Site Controller PCMCIA Memory PCB (C06731)
        • SW1 - Battery Enable Switches
      • RAM Considerations - Site Controller II Memory PCB (C02117 & C08331)
        • Applications
        • RAM ID
      • Test Points - All Memory PCB's
    • POWER SUPPLY
      • Layout
      • Connectors
        • AC Input
        • DC Output
      • DC Power Measurements and Adjustment
        • +5 VDC Measurement
        • +5 VDC Adjustment
        • +12 VDC Measurement
        • -12 VDC Measurement
    • RS-485 JUNCTION BOX
      • Layout
      • Connectors
        • TB1 - RS-485 Field Wiring (Unprotected)
        • P1 & P2 - Protected RS-485 Signals to Site Controller
    • SITE CONTROLLER I PROBLEMS
    • SITE CONTROLLER I ASSEMBLY PARTS
    • C05458 Site Controller I with 512K CPU and 128K Memory
    • RS-485 JUNCTION BOX PARTS
• c01759-3.pdf
  • SITE CONTROLLER II
    • DESCRIPTION
    • Layout - Top and Rear View (Shown with CPU II+ Board)
    • 3-1/2" Disk Drive Model (Single Drive, C05574; Dual Drive, C05575)
    • 5-1/4" Disk Drive Model (C05574) (No longer available)
    • Standard Fixed-Disk Hard Drive Model (C05573)
    • ENVIRONMENTAL AND OPERATING SPECIFICATIONS
    • FILTER MAINTENANCE
    • WIRING
    • Connectors
      • AC Power
      • RS-232 - Data Terminal Communications Port 0
      • RS-232 - Modem Communications Port 2
      • RS-232 - General Purpose Communications Ports 1 and 3
      • RS-485 - Loop 1 Island Communications Port
      • RS-485 - Loop 2 Console Communications Port
    • Chassis Wiring
    • SITE CONTROLLER II+ CPU PCB (C05852)
    • SITE CONTROLLER II CPU PCB (C05328)
    • Layout
    • LED Indicators
    • Connectors
      • P4 and P6 - RS-232 General Purpose Communications Ports
      • P1 - RS-485 Island Communications Port, P2 - RS-485 Console Communications Port
      • P3 - RS-232 Modem Communications Port 2, P5 - RS-232 Data Terminal Communications Port 0
      • P7 - SCSI PCB Interface - C05328 Only
      • P8 - AC Power Input
      • P9 - DC Power Input
      • P10 - Manager's Keyswitch
      • P13 - Floppy Disk Interface and Disk Drive Connector
      • P14 - CPU SCSI Interface Hard Drive Disk Connector (C05852 Only)
      • P11 - Memory PCB Interface
    • Jumpers
      • K1 and K2, Port 1 and Port 3 Configuration Jumpers
      • K23-K36 CPU Board Jumpers (C05328 CPU PCB)
      • J1, Memory Add Module Jumper (C05328 CPU PCB)
      • K23-K37 CPU Board Jumpers (C05852 CPU PCB)
    • Switches
      • DSW1 - Backup Sign-on, Hard Disk Access, Boot Modes
      • DSW1-7 and DSW1-8 Mode Set Switches
      • DSW2 - Baud Rates
      • Manager's Keyswitch
    • Test Points - CPU PCB
    • SITE CONTROLLER II MEMORY PCB
    • Layout - Site Controller II Memory PCB (C08331; No longer available)
    • Layout - Site Controller II PCMCIA 760K (C06731 and C07041)
    • Connector
      • P1 CPU PCB Interface
    • LED Indicators (C08331, C06731, C07041)
    • Jumpers - Site Controller II Memory PCB (C08331)
    • Jumpers - Site Controller PCMCIA Memory PCB (C06731 and C07041)
      • Memory Settings
    • Switches - Site Controller II Memory PCB (C08331)
      • SW1 - Battery Enable Switches
      • SW2 - Battery Power to CPU PCB Switch
    • Switches - Site Controller PCMCIA Memory PCB (C06731 and C07041)
      • SW1 - Battery Enable Switches
    • Test Points - Memory PCB
    • SCSI INTERFACE PCB (C05827; USED WITH C05328 CPU PCB ONLY)
    • Layout
    • Connectors
      • P1 SCSI Interface Connector
      • P2 CPU SCSI Interface Connector and Hard Drive Disk Connector
    • DISK DRIVES
    • Jumpers and Switches
      • Disk Drive Jumper/Switch Settings
    • Setting Floppy Disk Drives For Use With The Site Controller II
    • POWER SUPPLY
    • Layout
    • Connectors
      • AC Input
      • DC Output
    • DC Power Measurements and Adjustment
      • +5 VDC Measurement
      • +5 VDC Adjustment
      • +12 VDC Measurement
      • -12 VDC Measurement
    • RS-485 JUNCTION BOX
    • Layout
    • Connectors
      • TB1 - RS-485 Field Wiring (Unprotected)
      • P1 & P2 - Protected RS-485 Signals to Site Controller
    • RS-232 LOG SPLITTER (C05850)
    • Connectors
      • P1 - Site Controller Connection
      • P2 - Modem/Printer Connection
    • TOKHEIM SPLITTER (C05851)
    • Layout
    • Connectors
      • P1 - Site Controller Connection
      • P2 - Tokheim Pump Communications Connection
    • Jumpers
    • SITE CONTROLLER II PROBLEMS
    • SITE CONTROLLER II PARTS
    • SITE CONTROLLER II ASSEMBLY W/ONE OR TWO 3.5" DRIVES
    • SITE CONTROLLER II ASSEMBLY W/ONE 3.5" DRIVE AND HARD DRIVE
    • SITE CONTROLLER II ASSEMBLY W/ONE 5.25" DRIVE
    • RS-485 JUNCTION BOX PARTS
• C01759-4.pdf
  • ISLAND CARD READER
    • DESCRIPTION
    • Mag Island Card Reader Layout
    • Optical Island Card Reader Layout
    • WIRING
    • Connectors
      • AC Power Input
      • DC RS-485 Input
    • Mag Island Card Reader Wiring
    • Mag Island Card Reader/Gate Controller Wiring
    • Optical Island Card Reader Wiring
    • Optical Island Card Reader/Gate Controller Wiring
    • Gate Controller Wiring
    • ISLAND CARD READER CPU PCB (C05375)
    • Layout
    • DES Encryption Option - ICR
    • ISLAND CARD READER 2 CPU PCB (C05857)
    • Layout
    • LED Indicators
    • Connectors
      • P1 – Insertion Mag Reader (American Magnetics) – Track 2 Only
      • P1 – Swipe Mag Reader (Omron/Magtek) – Track 2 Only
      • P1A – Swipe Reader (Omron/Magtek Track 1 & 2)
      • P2 – Keypad (C05375)
      • P2 –Keypad (C05857)
      • P3 - Printer Communication
      • P4 - Power Supply Input
      • P5 - Datakey/Optical Reader
      • P6 - LCD Display
      • P7 (ICR) - RS-485 Communication, Printer Lamps & Switches, Beeper, Intrusion Switch
      • P7 (Gate) - RS-485 Communication, Gate Relay Drives, Gate Switch Sense, Beeper
    • Jumpers
      • Display Type (C05375 only)
      • Reader Type – C05375
      • RAM/Program Type (C05375 only)
    • Switches
      • S1 - Reset Switch
      • S2 - Miscellaneous Switches
      • NOVA.HEX Software (C05375 only)
      • NOVA.GATE or STAR.GATE Software (C05375 only)
      • ICR 2 Software (C05857 only)
      • S2 - Address Switches
      • S3 - Diagnostic Switch
    • RS-485 PCB (C05683)
    • Layout
    • Connectors
      • TB1 - RS-485 Wiring: Protected Pedestal PCU, Unprotected Non-Pedestal PCU
      • P3 - RS-485 Signals to CPU PCB (Protected)
    • LCD DISPLAY & INTERFACE PCB - NEW (C07506 & C06370)
    • Layouts
    • RX - Viewing Angle Adjustment
    • Connectors
      • P1 - CPU PCB Interface
      • P2 - Display Interface
      • P3 - Backlight Power
      • P4 - DC Power
    • LCD DISPLAY & I/F PCB's - OLD (C05442 & C05455)
    • Layouts
    • Adjustments
      • R8 - EL Backlight
      • R9 - Viewing Angle - Densitron Display
      • RX - Viewing Angle - Okaya Display
    • Connectors
      • P2 - Backlight Power
      • P3 - LCD I/F PCB
      • P4 - LCD Interface
    • LCD INTERFACE PCB (C04942)
    • Layout
    • Connectors
      • P1 - CPU PCB Interface
      • P2 - DC Power Input
      • P3 - LCD Interface
    • OPTICAL INTERFACE PCB (C05504)
    • Layout
    • Connectors
      • P1 - Display Interface
      • P2 - DC Power to Reader
      • P3 - DC Power Input
      • P4 - Optical Reader Interface
    • Jumpers
      • Reader Type
    • DISABLE PUMPS (EMERGENCY STOP) PCB (C05377)
    • Layout
    • Connectors
      • TB1 - RS-485 Input
      • P1 - Disable Pumps/Emergency Stop Switch
    • Jumpers
      • Disable Mode
    • KEYPAD
    • Layout - New Style
    • Schematic - New Style
    • Layout - Old Style
    • Schematic - Old Style
    • Connectors
      • P1 - Mag Card Reader Version
      • P1 - Optical Card Reader Version
    • GATE CONTROLLER I/O PCB (C05834)
    • Layout
    • LED Indicators
    • Connectors
      • P1 - Switch Detect
      • P2 - Beeper
      • P3 - Relay Output
      • P4 - CPU PCB Interface
    • POWER SUPPLY ASSEMBLY
    • Layout
    • LED Indicators
    • Connectors
      • DC Out
      • AC In
      • DC Power to CPU PCB
      • AC Power to Supply PCB
      • DC Power from Supply PCB
    • DC Power Measurements and Adjustment
      • +5 VDC Measurement
      • +5 VDC Adjustment
      • +12 VDC Measurement
    • DIAGNOSTIC TESTS
    • Start Diagnostic Mode
    • End Diagnostic Mode
    • Diagnostic Tests
    • ISLAND CARD READER (ICR) PROBLEMS
    • MAG ISLAND CARD READER PARTS
    • D
    • DISPLAY NOTE: For ICR serial numbers before DET11398, DPC10220 and DPR12413, order kit C07229. instead of individual components.
    • For ICR units manufactured between 5/98 and 4/01 with serial numbers between the following ranges, order kit C07520: DPR12413 through DPR13287, DPC10220 through DPC10266, and DET11398 through DET12113.
    • OPTICAL ISLAND CARD READER PARTS
    • DISPLAY NOTE: For ICR serial numbers before DET11398, DPC10220 and DPR12413, order kit C07229. instead of individual components.
    • For ICR units manufactured between 5/98 and 4/01 with serial numbers between the following ranges, order kit C07520: DPR12413 through DPR13287, DPC10220 through DPC10266, and DET11398 through DET12113.
    • POWER SUPPLY PARTS - ICR WITH STAR PRINTER
• C01759-5.pdf
  • ISLAND RECEIPT PRINTER
    • DESCRIPTION
    • Layout
    • Lamps
    • WIRING
    • Connectors
      • Island Card Reader CPU PCB (P7)
      • Island Card Reader CPU PCB (P3)
      • To Island Card Reader Power Supply
      • To Island Card Reader Chassis
    • Chassis Wiring
    • STAR PRINTER CONTROLLER PCB (C08933)
    • Layout
    • Connectors (Not Related to Printer Mechanism)
      • CN4 - Status PCB
      • CN8 - RS-232 From Island Card Reader CPU PCB
      • CN9 - DC Power
    • Switches
    • PRINTER STATUS PCB (C04665)
    • Layout
    • LED Indicators
    • Connectors
      • P1 - DC Power
      • P2 - Paper Low & Printer Test Outputs
      • P3 - Paper Low Switch
      • P4 - Status PCB
    • Switches
    • MAINTENANCE
    • Accessing the Printer
    • Changing the Paper
      • Removing the Paper
      • Installing the Paper
    • Changing the Ribbon
      • Removing Old Ribbon Spools
      • Installing New Ribbon Spools
    • Adjusting Cutter Blades
      • Adjust After Incomplete Cuts
      • Adjust After Paper Jams
    • RECEIPT PRINTER PROBLEMS
    • ISLAND RECEIPT PRINTER PARTS
• C01759-6.pdf
  • PUMP CONTROL UNIT
    • DESCRIPTION
    • Chassis Layout, Wall-Mount or Post Mount
    • WIRING
    • AC Connectors
    • DC Connectors
    • Chassis Wiring
    • PUMP CONTROL CMOS CPU PCB (C05321)
    • Layout
    • LED Indicators
    • Connector
      • P1 - Motherboard Interface Connector
    • Jumpers
    • Switches
      • SA - Reset Switch
      • SB - Address Switches
      • SB - Baud Rate Switches
      • SC - Switch Detect Mode Switches
      • SC - Miscellaneous Switches
    • PUMP CONTROL EXPANDED MULTIPLEXED (EXPMUX) CPU PCB (C05837)
    • LED Indicators
    • Connector
      • P1 - Motherboard Interface
    • Jumper
    • Switches
      • SA - Reset Switch
      • SB - Address Switches
      • SB - Pulser Select Switch
      • SB - Delay Time Switches
      • SC - Switch Detect Mode Switches
      • SC - Miscellaneous Switches
    • PUMP CONTROL I/O PCB ASSEMBLY (C05668)
    • Layout
    • LED Indicators
    • Connectors
      • P1 - RS-422 Out (Protected)
      • P2 - RS-422 In (Unprotected)
      • P3 - Pulser Input
      • P4 - Switch Detect/Reset Complete Inputs
      • P5 - Motherboard Interface
      • K1 - K4 Pulser Supply & Input
      • Schematic
      • K1 - K4 Pulser Input Jumpers
      • K5 - Pulser Debounce
    • PUMP CONTROL MOTHERBOARD PCB (C05371)
    • Layout
    • Connectors
      • P1 - Power Supply
      • P2 - Relay Drives
      • P3, P4, P5 - PCB Interface
    • Switches
      • S1, S2, S3, S4 - Override Switches
    • PUMP CONTROL POWER SUPPLY ASSEMBLY (C05040 W&M; C05059 FLEET)
    • Layout (C05040 only)
    • LED Indicators
    • Connectors
      • TB202 & AC Input for Power Supply Assembly
      • AC Output to ICR
      • P1 - DC Output from Power Supply PCB
      • P2 - AC Input to Power Supply PCB
      • P3 - LED & Battery Switch Interface
      • AC Power Switch
      • Battery Switch
    • Fuses
      • AC Power Fuse
      • F1 - +12 VDC Fuse
      • F2 - +5 VDC Fuse
    • +5 VDC
      • Measurement
    • PUMP CONTROL RELAY BRACKET (C05035 W&M; C05029 FLEET)
    • Layout
    • Connectors
      • Terminal Block
      • NOTE: Fast flow relays are available on C05666 and C07559 Weights and Measures units only.
      • Relay Connections
      • NOTE: Fast flow relays are available on C05666 and C07559 Weights and Measures units only.
    • VEEDER ROOT PULSER/TOTALIZER BRACKET (C05667)
    • Layout
    • Connectors
      • Terminal Block (Field Wiring)
      • AC Input Connections (units shipped prior to March 1988)
      • AC Input Connector (units shipped March 1988 and after)
      • AC Output Connector (units shipped March 1988 and after)
      • P1 - AC Input/DC Output for VR Totalizer PCB
    • Fuses
      • AC Fuse
      • DC Fuse
    • DIAGNOSTIC TESTS
    • Start Diagnostic Mode
      • SC-8 Test Mode SC-6 & 7 Pump to Test SC-5 Pump Limit
    • Diagnostic Tests
    • End Diagnostic Mode
    • PUMP CONTROL UNIT PROBLEMS
      • • Corrective Action
        • Corrective Action
        • Corrective Action
        • Corrective Action
        • Corrective Action
        • Corrective Action
        • Corrective Action
        • Corrective Action
    • PUMP CONTROL UNIT PARTS
    • PUMP CONTROL POWER SUPPLY
    • PEDESTAL PUMP CONTROL RELAY MODULE ASSEMBLY
    • STANDALONE PUMP CONTROL UNIT PARTS
    • C07558 Standalone Pump Control Unit, 8 Hose Fleet Mechanical (Fleet)
    • C07559 Standalone Pump Control Unit, 8 Hose Mechanical (W&M)
• C01759-7.pdf
  • POSTPAY - PREPAY CONSOLE
    • DESCRIPTION
    • WIRING
    • CONSOLE CPU PCB (C04832) FOR CONSOLES I, IA AND II
    • CONSOLE CPU PCB (C05836) FOR CONSOLES IA+ AND II+
    • VACUUM FLUORESCENT DRIVER PCB (C04839)
    • CONSOLE KEYBOARD ASSEMBLY (C04724, C05583, & C05990)
    • RS-422 PCB (C05379)
    • CASH DRAWER INTERFACE PCB (C05779)
    • POWER SUPPLY ASSEMBLY (C05423) FOR CONSOLES I, IA, AND II
    • POWER SUPPLY (C09053) FOR CONSOLES IA+ AND II+
    • CONSOLE I DIAGNOSTIC TESTS
    • CONSOLE IA AND II DIAGNOSTIC TESTS
    • CONSOLE IA+ AND II+ DIAGNOSTIC TESTS
    • CONSOLE CPU BOARD REPLACEMENT
    • CONSOLE PROBLEMS
    • CONSOLE I, IA, AND II PARTS
    • CONSOLE IA+ AND II+ PARTS
• C01759-8.pdf
  • STANDALONE RECEIPT PRINTER
    • GENERAL INFORMATION
    • STAR PRINTER
      • Layout
      • Star Printer Connectors
        • AC Power
        • RS-422 Serial
        • RS-232 Serial
        • Parallel
      • Star Printer Wiring
        • RS-422 Serial Wiring
        • RS-232 Serial Wiring
        • Parallel Wiring
      • Star Printer Jumpers - Main Logic Board
        • SW5 and SW6
      • Star Printer LED's and Operating Controls
      • Star Printer Switches
        • DSW1
        • DSW2
        • DSW3 - Serial Only
        • DSW4 - Serial Only
    • EPSON PRINTER
      • Layout
      • Epson Printer Connectors
        • AC Power Plug
        • PIN Pad
        • RS-422
      • Epson Printer Wiring
        • Chassis Wiring
    • EPSON CPU PCB (C04934)
      • Layout
        • DES Encryption Option
      • Epson CPU PCB LED Indicators
      • Epson CPU PCB Connectors
        • P2 - PIN Pad
        • P3 - Receipt Printer
        • P4 - Power Supply Input
        • P7 - RS-422, PIN Pad Lamps, Paper Advance Switch
      • Epson CPU PCB Jumpers
        • K1 & K2
        • K3 - RAM Type
      • Epson CPU PCB Switches
        • S1 - Reset Switch
        • S2 - Miscellaneous Switches
        • PRINT.HEX V4.2B Software 07/31/87 & Earlier
        • PRINT.HEX V4.3 Software 08/14/86 & Later
        • S3
    • STANDALONE RECEIPT PRINTER PROBLEMS
    • STAR STANDALONE RECEIPT PRINTER PARTS
    • STAR STANDALONE RECEIPT PRINTER PARTS
• C01759-9.pdf
  • PIN PAD
    • DESCRIPTION
    • VERIFONE PIN PAD
      • Layout
      • Verifone PIN Pad LCD Display
      • Verifone PIN Pad Connector
        • PIN Pad Modular Connector
      • Verifone PIN Pad Wiring
      • Verifone PIN Pad Self-Tests
    • GASBOY PIN PAD
      • Layout
      • LED Indicators
      • GASBOY PIN Pad Connector
        • PIN Pad Interface
      • GASBOY PIN Pad Wiring
    • PIN PAD PROBLEMS
      • Checks
    • CLEANING
    • PIN PAD PARTS
    • GASBOY PIN PAD PARTS
• C0175910.pdf
  • CASH DRAWER
    • DESCRIPTION
      • Layout
    • WIRING
      • Connector
        • Cash Drawer
      • Chassis Wiring
    • PREVENTATIVE MAINTENANCE
    • REPLACEMENT INSTRUCTIONS
      • Remove Inner Cash Drawer From Case
      • Replace Inner Cash Drawer
    • CONSOLE CASH DRAWER PROBLEMS
      • Corrective Action
    • CASH DRAWER PARTS
• C0175911.pdf
  • CUSTOMER DISPLAY
    • DESCRIPTION
      • Layout
    • WIRING
      • Connector
        • P-P Console
      • Chassis Wiring
    • VACUUM FLUORESCENT DRIVER PCB (C04839)
      • Layout
      • LED Indicators
        • P2 - RS-422 Communication from Console
        • P3 - Power Supply Input
      • Switches
        • SW1 - Miscellaneous Switches
    • CONSOLE CUSTOMER DISPLAY PROBLEMS
    • CUSTOMER DISPLAY PARTS
• C0175912.pdf
  • SITE CONTROLLER III
    • DESCRIPTION
    • ENVIRONMENTAL AND OPERATING SPECIFICATIONS
    • WIRING
      • AC Power
      • RS-232 - General Purpose Communications Port 1
      • RS-232 - General Purpose Communications Ports 4, 5, and 6
      • RS-485 - Loop 1 Island Communications
      • RS-485 - Loop 2 Island Communications (Usually to Tokheim DPTs)
      • RS-485 - Loop 3 Console Communications
      • Dual Tokheim Pump Communications Port 3
    • SITE CONTROLLER III COMM. (CPU) PCB (C05838)
      • P1 - Memory PCB Interface
      • P1 - Memory PCB Interface (Continued)
      • P1 - Memory PCB Interface (Continued)
      • P7 – RS-232 General Purpose Synchronous Communications Port 2
      • P8 - Memory PCB Communication ports Interface
      • P8 - Memory PCB Communication ports Interface (Continued)
      • PC ISA Bus Interface Connector – Component Side
      • PC ISA Bus Interface connector – Solder Side
      • P9 - RS-232 General Purpose Communications Port 1
      • P10 - RS-485 Console Communications Loop 3
      • P11 & P12 - RS-485 Island Communications Loops 1 & 2
    • SITE CONTROLLER III MEMORY I/O PCB
      • P1 CPU PCB Interface
      • P1 - CPU PCB Interface (Continued)
      • P1 - CPU PCB Interface (Continued)
      • P2 - CPU PCB Communication ports Interface
      • P2 - CPU PCB Communication ports Interface (Continued)
      • PC ISA Bus Interface connector
      • P3, P4, & P5 - RS-232 General Purpose Communications Ports 6, 5, and 4 respectively
      • P6 – Dual Tokheim Port 3
      • Switch S1
    • SITE CONTROLLER III PC (C07118)
    • RS-485 JUNCTION BOX
      • TB1 - RS-485 Field Wiring (Unprotected)
      • P1 & P2 - Protected RS-485 Signals to Site Controller
    • TOKHEIM PUMPS
    • SITE CONTROLLER III PROBLEMS
    • SC III PC AND ACCESSORIES
    • SC III PC AND ACCESSORIES
    • RS-485 JUNCTION BOX PARTS
• C0175913.pdf
  • CFN ISLANDER
    • DESCRIPTION
    • SYSTEM TYPES
    • LAYOUT
    • ENVIRONMENTAL AND OPERATING SPECIFICATIONS
    • WIRING
    • ISLANDER I (SITE CONTROLLER I C05820) CPU – 512K PCB
    • ISLANDER I MEMORY PCB
    • ISLANDER II (SITE CONTROLLER II C05852) CPU PCB
    • ISLANDER II MEMORY PCB (C05849)
    • SITE COMMUNICATIONS I/O PCB (C06580)
    • ISLAND CARD READER CPU PCB (C05375)
    • ISLAND CARD READER 2 CPU PCB (C05857)
    • RS-485 CONNECTION PCB (C06646)
    • LCD DISPLAY & INTERFACE PCB - NEW (C05567 & C06370)
    • LCD DISPLAY - OLD (C06693)
    • KEY INTERFACE PCB (C05159)
    • DISABLE PUMPS (EMERGENCY STOP) PCB (C05377)
    • KEYPAD
    • RS-485 JUNCTION BOX
    • TOKHEIM PUMPS
    • CFN ISLANDER PROBLEMS
    • KEY READ/RECEPTACLE PROBLEMS
    • ISLANDER SATELLITE OR CARD READER PROBLEMS
    • PEDESTAL RECEIPT PRINTER PROBLEMS
    • PUMP CONTROL UNIT PROBLEMS
    • CFN ISLANDER PARTS