Avago Technologies MegaRAID SAS 9280-16i4e Instruction Manuals and User Guides
We have 10 Instruction Manuals and User Guides for MegaRAID SAS 9280-16i4e Avago Technologies
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 80 |
| Size: | 871 KB |
Show table of contents
Document Outline
- StorCLI Reference Manual
- Chapter 1: Introduction
- Chapter 2: Installation
- 2.1 Installing StorCLI on Microsoft Windows Operating Systems
- 2.2 Installing StorCLI on Linux Operating Systems
- 2.3 Installing StorCLI on VMware Operating Systems
- 2.4 Installing StorCLI on FreeBSD Operating Systems
- 2.5 Installing StorCLI on the Microsoft EFI
- 2.6 Installing StorCLI on Solaris Operating Systems
- Chapter 3: StorCLI Command Syntax
- Chapter 4: Working with the Storage Command Line Tool
- 4.1 System Commands
- 4.2 Controller Commands
- 4.3 Drive Commands
- 4.3.1 Drive Show Commands
- 4.3.2 Missing Drives Commands
- 4.3.3 Set Drive State Commands
- 4.3.4 Drive Initialization Commands
- 4.3.5 Drive Firmware Download Commands
- 4.3.6 Locate Drives Commands
- 4.3.7 Prepare to Remove Drives Commands
- 4.3.8 Drive Security Commands
- 4.3.9 Drive Secure Erase Commands
- 4.3.10 Rebuild Drives Commands
- 4.3.11 Drive Copyback Commands
- 4.3.12 Hot Spare Drive Commands
- 4.3.13 Drive Security Commands
- 4.4 Virtual Drives Commands
- 4.4.1 Add Virtual Drives Commands
- 4.4.2 Delete Virtual Drives Commands
- 4.4.3 Virtual Drive Show Commands
- 4.4.4 Preserved Cache Commands
- 4.4.5 Change Virtual Drive Properties Commands
- 4.4.6 Virtual Drive Initialization Commands
- 4.4.7 Virtual Drive Erase Commands
- 4.4.8 Virtual Drive Migration Commands
- 4.4.9 Virtual Drive Consistency Check Commands
- 4.4.10 Background Initialization Commands
- 4.4.11 Virtual Drive Expansion Commands
- 4.5 Foreign Configurations Commands
- 4.6 BIOS-Related Commands
- 4.7 Drive Group Commands
- 4.8 Dimmer Switch Commands
- 4.9 BBU Commands
- 4.10 Enclosure Commands
- 4.11 PHY Commands
- 4.12 Logging Commands
- Chapter 5: Frequently Used Tasks
- 5.1 Showing the Version of the Storage Command Line Tool
- 5.2 Showing StorCLI Help
- 5.3 Showing System Summary Information
- 5.4 Showing Free Space in a Controller
- 5.5 Adding Virtual Drives
- 5.6 Setting the Cache Policy in a Virtual Drive
- 5.7 Showing Virtual Drive Information
- 5.8 Deleting Virtual Drives
- 5.9 Flashing Controller Firmware
- Appendix A: 3Ware CLI Commands to StorCLI Command Conversion
- Appendix B: MegaCLI Commands to StorCLI Command Conversion
- Appendix C: Unsupported Commands in Embedded MegaRAID
- Appendix D: Revision Information
| Recognized languages: | English |
|---|---|
| Pages: | 64 |
| Size: | 689 KB |
Show table of contents
Document Outline
- MegaRAID® SAS Device Driver Installation User Guide
- Chapter 1: Overview
- Chapter 2: Windows Driver Installation
- 2.1 MegaRAID Primary Storage
- 2.2 Primary OS Storage on the MegaRAID Controller
- 2.3 Secondary Storage on the MegaRAID Controller with the Windows 2008 OS
- 2.4 Secondary Storage on the MegaRAID Controller with the Windows 2003 OS
- 2.5 Installing a MegaRAID Driver on the Microsoft Windows 8 OS
- 2.6 Installing a MegaRAID Driver on the Windows Server 2012 Operating System
- Chapter 3: Red Hat Linux Driver Installation
- Chapter 4: SuSE Linux Enterprise Server (SLES) 10 and 11 Driver Installation
- Chapter 5: Ubuntu Linux Driver Installation
- Chapter 6: FreeBSD Driver Installation
- 6.1 LSI MegaRAID Drivers and Software for the FreeBSD OS
- 6.2 Obtaining LSI FreeBSD Drivers
- 6.3 Creating a FreeBSD OS Driver Diskette
- 6.4 Installing the FreeBSD OS on Storage Managed by a MegaRAID Controller (Primary Storage)
- 6.5 Installing the Kernel Driver on a FreeBSD OS that Boots from a Device Not Managed by a MegaRAID Controller (Secondary Storage)
- 6.6 Updating Drivers in the FreeBSD System
- Chapter 7: VMware ESX/ESXi 4.x and ESXi 5.x Driver Installation
- Chapter 8: Solaris 10 x86, Solaris 11, and Solaris Express x86 Driver Installation
- 8.1 Contents of the Driver Distribution
- 8.2 Supported Hardware
- 8.3 Supported Operating Systems
- 8.4 Installing the Driver Package During OS Installation (Solaris10 OS, x86 Only)
- 8.5 Installing the Driver Package during OS Installation (Solaris11 OS, x86 Only)
- 8.6 Installing or Upgrading the Driver Package after OS Installation
- 8.7 Removing the Driver Package
- 8.8 Notes
- Chapter 9: XenServer Driver Installation
- Chapter 10: Debian Driver Installation
- Chapter 11: Oracle Enterprise Linux Driver Installation
- Chapter 12: Fedora Driver Installation
- Chapter 13: CentOS Driver Installation
- Chapter 14: OVM Driver Installation
| Recognized languages: | English |
|---|---|
| Pages: | 92 |
| Size: | 1.57 MB |
Show table of contents
Document Outline
- 6Gb/s MegaRAID SAS RAID Controllers User Guide
- Chapter 1: Overview
- 1.1 Overview
- 1.2 General Description
- 1.3 6Gb/s MegaRAID SATA+SAS RAID Controller Detailed Descriptions
- 1.3.1 MegaRAID SAS 9240 RAID Controllers
- 1.3.2 MegaRAID SAS 9260 RAID Controllers
- 1.3.3 MegaRAID SAS 9261 RAID Controller
- 1.3.4 MegaRAID SAS 9265 RAID Controllers
- 1.3.5 MegaRAID SAS 9266 RAID Controllers
- 1.3.6 MegaRAID SAS 9270 RAID Controller
- 1.3.7 MegaRAID SAS 9271 RAID Controllers
- 1.3.8 MegaRAID SAS 9280 RAID Controllers
- 1.3.9 MegaRAID SAS 9285 RAID Controllers
- 1.3.10 MegaRAID SAS 9286 RAID Controllers
- 1.4 Configuration Scenarios
- 1.5 Benefits of the SAS Interface
- 1.6 Summary of 6Gb/s MegaRAID SATA+SAS RAID Controller Characteristics
- 1.7 Hardware Specifications
- 1.8 Technical Support
- Chapter 2: MegaRAID SAS Hardware Installation
- Chapter 3: MegaRAID SAS RAID Controller Characteristics
- 3.1 6Gb/s MegaRAID SAS RAID Controller Family
- 3.1.1 MegaRAID SAS 9240 RAID Controllers
- 3.1.2 MegaRAID SAS 9260 RAID Controllers
- 3.1.3 MegaRAID SAS 9261 RAID Controller
- 3.1.4 MegaRAID SAS 9265 RAID Controllers
- 3.1.5 MegaRAID SAS 9266 RAID Controllers
- 3.1.6 MegaRAID SAS 9270 RAID Controller
- 3.1.7 MegaRAID SAS 9271 RAID Controllers
- 3.1.8 MegaRAID SAS 9280 RAID Controllers
- 3.1.9 MegaRAID SAS 9285 RAID Controllers
- 3.1.10 MegaRAID SAS 9286 RAID Controllers
- 3.2 MegaRAID SAS 6Gb/s RAID Controller Characteristics
- 3.3 Technical Specifications
- 3.1 6Gb/s MegaRAID SAS RAID Controller Family
- Glossary
- Chapter 1: Overview
| Recognized languages: | English |
|---|---|
| Pages: | 49 |
| Size: | 786 KB |
Show table of contents
Document Outline
- MegaRAID® SAS Device Driver Installation User Guide
- Chapter 1: Overview
- Chapter 2: Windows Driver Installation
- 2.1 MegaRAID Primary Storage
- 2.2 Primary OS Storage on the MegaRAID Controller
- 2.3 Secondary Storage on the MegaRAID Controller with the Windows 2008 OS
- 2.4 Secondary Storage on the MegaRAID Controller with the Windows 2003 OS
- 2.5 Installing a MegaRAID Driver on the Microsoft Windows 8 OS
- 2.6 Installing a MegaRAID Driver on the Windows Server 2012 Operating System
- Chapter 3: Red Hat Linux Driver Installation
- Chapter 4: SuSE Linux Enterprise Server (SLES) 10 and 11 Driver Installation
- Chapter 5: Ubuntu Linux Driver Installation
- Chapter 6: FreeBSD Driver Installation
- 6.1 LSI MegaRAID Drivers and Software for the FreeBSD OS
- 6.2 Obtaining LSI FreeBSD Drivers
- 6.3 Creating a FreeBSD OS Driver Diskette
- 6.4 Installing the FreeBSD OS on Storage Managed by a MegaRAID Controller (Primary Storage)
- 6.5 Installing the Kernel Driver on a FreeBSD OS That Boots from a Device Not Managed by a MegaRAID Controller (Secondary Storage)
- 6.6 Updating Drivers in the FreeBSD System
- Chapter 7: VMware ESX/ESXi 4.x and ESXi 5.0 Driver Installation
- Chapter 8: Solaris 10 x86, Solaris 11, and Solaris Express x86 Driver Installation
- 8.1 Installing the Solaris 10 U5 OS on Storage Managed by a MegaRAID Controller (Primary Storage)
- 8.2 Adding the MegaRAID Driver for Secondary Storage during the Solaris 10 OS Installation
- 8.3 Adding the MegaRAID Driver for Secondary Storage after the Solaris OS Installation
- 8.4 Installing the Solaris 11 OS on Storage Managed by a MegaRAID Controller (Primary Storage)
- 8.5 Updating the MegaRAID Driver on the Solaris OS on Storage Not Managed by a MegaRAID Controller (Secondary Storage) after OS Installation
- Chapter 9: XenServer Driver Installation
- Chapter 10: Debian Driver Installation
- Chapter 11: OVM Driver Installation
- Chapter 12: Fedora Driver Installation
- Chapter 13: CentOS Driver Installation
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 399 KB |
Show table of contents
Document Outline
- MegaRAID SAS Device Driver Installation User Guide
- Overview
- Windows Driver Installation
- Novell NetWare Driver Installation
- Red Hat Linux Driver Installation
- SUSE Linux Enterprise Server (SLES) 9.0, 10.0, 11.0 Driver Installation
- SCO OpenServer 6 and SCO UnixWare 7 Driver Installation
- FreeBSD Driver Installation
- Solaris 10 x86 and Solaris Express x86 Driver Installation
- Customer Feedback
| Recognized languages: | English |
|---|---|
| Pages: | 14 |
| Size: | 339 KB |
Show table of contents
Document Outline
- MegaRAID Remote Kit for the LSIiBBU06, LSIiBBU07, and LSIiBBU08 Intelligent Battery Backup Units Quick Installation Guide
- MegaRAID Remote Kit for the LSIiBBU06, LSIiBBU07, and LSIiBBU08 Intelligent Battery Backup Units
| Recognized languages: | English |
|---|---|
| Pages: | 16 |
| Size: | 339 KB |
Show table of contents
Document Outline
- MegaRAID LSIiBBU08 Intelligent Battery Backup Unit Quick Installation Guide
- MegaRAID LSIiBBU08 Intelligent Battery Backup Unit
- Front View and Rear View of the LSIiBBU08
- Installing the LSIiBBU08 Directly on the MegaRAID SAS RAID Controller
- Connecting the LSIiBBU08 Remotely to the MegaRAID SAS RAID Controller
- Technical Support
| Recognized languages: | English |
|---|---|
| Pages: | 502 |
| Size: | 27.34 MB |
Show table of contents
Document Outline
- MegaRAID® SAS Software User Guide
- Overview
- Introduction to RAID
- 2.1 RAID Description
- 2.2 RAID Benefits
- 2.3 RAID Functions
- 2.4 Components and Features
- 2.4.1 Drive Group
- 2.4.2 Virtual Drive
- 2.4.3 Fault Tolerance
- 2.4.4 Consistency Check
- 2.4.5 Copyback
- 2.4.6 Background Initialization
- 2.4.7 Patrol Read
- 2.4.8 Disk Striping
- 2.4.9 Disk Mirroring
- 2.4.10 Parity
- 2.4.11 Disk Spanning
- 2.4.12 Hot Spares
- 2.4.13 Disk Rebuilds
- 2.4.14 Rebuild Rate
- 2.4.15 Hot Swap
- 2.4.16 Drive States
- 2.4.17 Virtual Drive States
- 2.4.18 Beep Codes
- 2.4.19 Enclosure Management
- 2.5 RAID Levels
- 2.6 RAID Configuration Strategies
- 2.7 RAID Availability
- 2.8 Configuration Planning
- 2.9 Number of Drives
- SafeStore Disk Encryption
- WebBIOS Configuration Utility
- 4.1 Overview
- 4.2 Starting the WebBIOS configuration utility
- 4.3 WebBIOS configuration utility Main Dialog Options
- 4.4 Managing Software Licensing
- 4.4.1 Managing MegaRAID Advanced Software Options
- 4.4.2 Reusing the Activation Key
- 4.4.3 Managing Advanced Software Summary
- 4.4.4 Activating an Unlimited Key Over a Trial Key
- 4.4.5 Activating a Trial Software
- 4.4.6 Activating an Unlimited Key
- 4.4.7 Securing MegaRAID Advanced Software
- 4.4.8 Confirm Re-hosting Process
- 4.4.9 Re-hosting Process Complete
- 4.5 Creating a Storage Configuration
- 4.6 CacheCade Configuration
- 4.7 Selecting SafeStore Encryption Services Security Options
- 4.7.1 Enabling the Security Key Identifier, Security Key, and Password
- 4.7.2 Enabling Drive Security using EKM
- 4.7.3 Changing the Security Key Identifier, Security Key, and Pass Phrase
- 4.7.4 Change Security from EKM to LKM
- 4.7.5 Changing Security from LKM to EKM
- 4.7.6 Disabling the Drive Security Settings
- 4.8 Viewing and Changing Device Properties
- 4.8.1 Viewing Controller Properties
- 4.8.2 Viewing Virtual Drive Properties, Policies, and Operations
- 4.8.3 Viewing Drive Properties
- 4.8.4 Shield State
- 4.8.5 Viewing and Changing Battery Backup Unit Information
- 4.8.6 Managing Link Speed
- 4.8.7 Viewing Enclosure Properties
- 4.8.8 SSD Disk Cache Policy
- 4.8.9 Emergency Hotspare
- 4.8.10 Emergency Hotspare for Controllers
- 4.9 Viewing and Expanding a Virtual Drive
- 4.10 Suspending and Resuming Virtual Drive Operations
- 4.11 Using MegaRAID Recovery
- 4.11.1 Recovery Scenarios
- 4.11.2 Enabling the Recovery Advanced Software
- 4.11.3 Creating Snapshots and Views
- 4.11.4 Creating Concurrent Snapshots
- 4.11.5 Selecting the Snapshot Settings
- 4.11.6 Viewing Snapshot Properties
- 4.11.7 Restoring a Virtual Drive by Rolling Back to a Snapshot
- 4.11.8 Cleaning Up a Snapshot Repository
- 4.12 Non-SED Secure Erase
- 4.13 Viewing System Event Information
- 4.14 Managing Configurations
- 4.14.1 Running a Consistency Check
- 4.14.2 Deleting a Virtual Drive
- 4.14.3 Importing or Clearing a Foreign Configuration
- 4.14.4 Importing Foreign Configurations
- 4.14.5 Import Foreign Drives in EKM/EKM Secured Locked Drives
- 4.14.6 Importing Foreign Drives for LKM-Secured Locked Drives
- 4.14.7 Importing Foreign Drives in LKM Mode EKM-Secured Locked Drives
- 4.14.8 Migrating the RAID Level of a Virtual Drive
- 4.14.9 New Drives Attached to a MegaRAID Controller
- 4.15 WebBIOS Dimmer Switch
- MegaRAID Command Tool
- 5.1 Product Overview
- 5.2 Novell NetWare, SCO, Solaris, FreeBSD, and MS-DOS Operating System Support
- 5.3 Command Line Abbreviations and Conventions
- 5.4 Pre-boot MegaCLI
- 5.5 CacheCade Related Options
- 5.5.1 Create a Solid State Drive Cache Drive to Use as Secondary Cache
- 5.5.2 Delete a Solid State Drive Cache Drive
- 5.5.3 Associate/Disassociate Virtual Drives
- 5.5.4 Display CacheCade Pro 2.0 Configurations on a Controller
- 5.5.5 Create a RAID Drive Group for CacheCade Pro 2.0 from All Unconfigured Good Drives
- 5.5.6 Remove Blocked Access on a Virtual Drive
- 5.5.7 Create RAID 0 Configuration with SSD Caching
- 5.5.8 Create a RAID Level 10, 50, 60 (spanned) Configuration with SSD Caching
- 5.5.9 Delete Virtual Drives with SSD Caching
- 5.5.10 Clear Configurations on CacheCade Pro 2.0 Virtual Drives
- 5.5.11 Create a CacheCade Pro 2.0 Virtual Drive with RAID level and Write Policy
- 5.6 Software License Key
- 5.7 SafeStore Security Options
- 5.8 Controller Property-Related Options
- 5.8.1 Display Controller Properties
- 5.8.2 Display Number of Controllers Supported
- 5.8.3 Enable or Disable Automatic Rebuild
- 5.8.4 Flush Controller Cache
- 5.8.5 Set Controller Properties
- 5.8.6 Display Specified Controller Properties
- 5.8.7 Set Factory Defaults
- 5.8.8 Set SAS Address
- 5.8.9 Set Time and Date on Controller
- 5.8.10 Display Time and Date on Controller
- 5.8.11 Get Connector Mode
- 5.8.12 Set Connector Mode
- 5.9 Patrol Read-Related Controller Properties
- 5.10 BIOS-Related Properties
- 5.11 Battery Backup Unit-Related Properties
- 5.12 Options for Displaying Logs Kept at the Firmware Level
- 5.13 Configuration-Related Options
- 5.13.1 Create a RAID Drive Group from All Unconfigured-Good Drives
- 5.13.2 Add RAID 0, 1, 5, or 6 Configuration
- 5.13.3 Add RAID 10, 50, or 60 Configuration
- 5.13.4 Clear the Existing Configuration
- 5.13.5 Save the Configuration on the Controller
- 5.13.6 Restore the Configuration Data from File
- 5.13.7 Manage Foreign Configuration Information
- 5.13.8 Delete Specified Virtual Drives
- 5.13.9 Display the Free Space
- 5.14 Virtual Drive-Related Options
- 5.14.1 Display Virtual Drive Information
- 5.14.2 Change the Virtual Drive Cache and Access Parameters
- 5.14.3 Display the Virtual Drive Cache and Access Parameters
- 5.14.4 Manage Virtual Drives Initialization
- 5.14.5 Manage a Consistency Check
- 5.14.6 Schedule a Consistency Check
- 5.14.7 Manage a Background Initialization
- 5.14.8 Perform a Virtual Drive Reconstruction
- 5.14.9 Display Information about Virtual Drives and Drives
- 5.14.10 Display the Bad Block Table
- 5.14.11 Display the Number of Virtual Drives
- 5.14.12 Clear the LDBBM Table Entries
- 5.14.13 Display the List of Virtual Drives with Preserved Cache
- 5.14.14 Discard the Preserved Cache of a Virtual Drives
- 5.14.15 Expand a Virtual Drive
- 5.15 Drive-Related Options
- 5.15.1 Display Drive Information
- 5.15.2 Set the Drive State to Online
- 5.15.3 Set the Drive State to Offline
- 5.15.4 Change the Drive State to Unconfigured-Good
- 5.15.5 Change the Drive State
- 5.15.6 Manage a Drive Initialization
- 5.15.7 Rebuild a Drive
- 5.15.8 Locate the Drives and Activate LED
- 5.15.9 Mark the Configured Drive as Missing
- 5.15.10 Display the Drives in Missing Status
- 5.15.11 Replace the Configured Drives and Start an Automatic Rebuild
- 5.15.12 Prepare the Unconfigured Drive for Removal
- 5.15.13 Display Total Number of Drives
- 5.15.14 Display List of Physical Devices
- 5.15.15 Download Firmware to the Physical Devices
- 5.15.16 Configure All Free Drives into a RAID 0, 1, 5, or 6 Configuration for a Specific Controller
- 5.15.17 Set the Mapping Mode of the Drives to the Selected Controllers
- 5.15.18 Secure Erase for Virtual Drives and Physical Drives
- 5.15.19 Perform the Copyback Operation on the Selected Drive
- 5.16 Enclosure-Related Options
- 5.17 Flashing the Firmware
- 5.18 SAS Topology
- 5.19 Diagnostic-Related Options
- 5.20 Recovery (Snapshot)-Related Options
- 5.20.1 Enable the Snapshot Feature
- 5.20.2 Disable the Snapshot Feature
- 5.20.3 Take a Snapshot of a Volume
- 5.20.4 Set the Snapshot Properties
- 5.20.5 Delete a Snapshot
- 5.20.6 Create a View
- 5.20.7 Delete a View
- 5.20.8 Roll back to an Older Snapshot
- 5.20.9 Display Snapshot and View Information
- 5.20.10 Clean the Recoverable Free Space on the Drives in a Virtual Drive
- 5.20.11 Display the Information for a Specific View
- 5.20.12 Enable the Snapshot Scheduler
- 5.21 FastPath-Related Options
- 5.22 Dimmer Switch-Related Options
- 5.22.1 Display Selected Adapter Properties
- 5.22.2 Sets the Properties on the Selected Adapter
- 5.22.3 Displays the Power-Saving Level on the Virtual Disk
- 5.22.4 Displays about Adding a RAID Level to a Specified Adapter
- 5.22.5 Create a RAID Level
- 5.22.6 Add the Unconfigured Drive to a Specified Adapter
- 5.22.7 Displays the Cache and Access Policies
- 5.23 Performance Monitoring Options
- 5.24 Miscellaneous Commands
- MegaRAID Storage Manager Overview and Installation
- 6.1 Overview
- 6.2 Hardware and Software Requirements
- 6.3 Prerequisites to Running MegaRAID Storage Manager Remote Administration
- 6.4 Installing MegaRAID Storage Manager
- 6.4.1 Prerequisite for MegaRAID Storage Manager Installation
- 6.4.2 Installing MegaRAID Storage Manager Software on Microsoft Windows
- 6.4.3 Installing MegaRAID Storage Manager for the Solaris SPARC Operating System
- 6.4.4 Uninstalling MegaRAID Storage Manager Software for Solaris SPARC Operating System
- 6.4.5 Installing MegaRAID Storage Manager for Linux Operating System
- 6.4.6 Prerequisites for Installing MegaRAID Storage Manager on the RHEL6.0 x64 Operating System
- 6.4.7 Linux Error Messages
- 6.4.8 Kernel Upgrade
- 6.4.9 Uninstalling MegaRAID Storage Manager Software on Linux
- 6.4.10 MegaRAID Storage Manager Customization
- 6.5 MegaRAID Storage Manager Support and Installation on VMware
- 6.6 Installing and Configuring a CIM Provider
- 6.7 Installing and Configuring an SNMP Agent
- 6.7.1 Prerequisite for LSI SNMP Agent RPM Installation
- 6.7.2 Prerequisite for Installing SNMP Agent on Linux Server
- 6.7.3 Installing and Configuring an SNMP Agent on a Linux Operating System
- 6.7.4 Installing and Configuring an SNMP Agent on the Solaris Operating System
- 6.7.5 Installing an SNMP Agent on the Windows Operating System
- 6.8 MegaRAID Storage Manager Support and Installation on the Solaris 10 Operating System
- 6.9 Installing MegaCLI for VMware 5.0
- 6.10 MegaRAID Storage Manager Remotely Connecting to VMware ESX
- 6.11 Prerequisites to Running MegaRAID Storage Manager Remote Administration
- MegaRAID Storage Manager Window and Menus
- 7.1 Starting the MegaRAID Storage Manager Software
- 7.2 MegaRAID Storage Manager Main Menu
- 7.2.1 Dashboard, Physical View, Logical View
- 7.2.2 Shield State
- 7.2.3 Shield State Physical View
- 7.2.4 Logical View Shield State
- 7.2.5 Viewing the Physical Drive Properties
- 7.2.6 Viewing Server Profile of a Drive in Shield State
- 7.2.7 Displaying the Virtual Drive Properties
- 7.2.8 Emergency HotSpare Support
- 7.2.9 SSD Disk Cache Policy
- 7.2.10 Non-SED Secure Erase Support
- 7.2.11 Rebuild Write Cache
- 7.2.12 Background Suspend or Resume Support
- 7.2.13 Enclosure Properties
- 7.3 Monitoring Battery Backup Units
- Configuration
- Monitoring Controllers and Its Attached Devices
- 9.1 Alert Delivery Methods
- 9.2 Configuring Alert Notifications
- 9.3 Editing Alert Delivery Methods
- 9.4 Changing Alert Delivery Methods for Individual Events
- 9.5 Changing the Severity Level for Individual Events
- 9.6 Rollback to Default Individual Event Configuration
- 9.7 Entering or Editing the Sender Email Address and SMTP Server
- 9.8 Authenticating the SMTP Server
- 9.9 Adding Email Addresses of Recipients of Alert Notifications
- 9.10 Testing Email Addresses of Recipients of Alert Notifications
- 9.11 Removing Email Addresses of Recipients of Alert Notifications
- 9.12 Saving Backup Configurations
- 9.13 Loading Backup Configurations
- 9.14 Monitoring Server Events
- 9.15 Monitoring Controllers
- 9.16 Monitoring Drives
- 9.17 Running a Patrol Read
- 9.18 Monitoring Virtual Drives
- 9.19 Monitoring Enclosures
- 9.20 Battery Learn Cycle
- 9.21 Monitoring Rebuilds and Other Processes
- Maintaining and Managing Storage Configurations
- Using MegaRAID Advanced Software
- 11.1 MegaRAID Advanced Software
- 11.2 Recovery Advanced Software
- 11.2.1 MegaRAID Software Licensing
- 11.2.2 Managing MegaRAID Advanced Software
- 11.2.3 Activation Key
- 11.2.4 Advanced MegaRAID Software Status Summary
- 11.2.5 Application Scenarios and Messages
- 11.2.6 Activating an Unlimited Key Over a Trial Key
- 11.2.7 Configuring Key Vault (Re-hosting process)
- 11.2.8 Re-hosting Complete
- 11.2.9 Deactivate Trial Software
- 11.2.10 MegaRAID Recovery
- 11.2.11 Recovery Scenarios
- 11.2.12 Enabling the Recovery Advanced Software
- 11.2.13 Snapshot Repository
- 11.2.14 Selecting the Virtual Drive
- 11.2.15 Scheduling Snapshots
- 11.2.16 Editing Snapshots
- 11.2.17 Snapshot Base Details
- 11.2.18 Manage Snapshots
- 11.2.19 Editing Schedule
- 11.2.20 Advanced Settings
- 11.2.21 Create View Using Manage Snapshots Wizard
- 11.2.22 Viewing Snapshot Details
- 11.2.23 No View Details for Snapshot
- 11.2.24 No Snapshot Schedule
- 11.2.25 Graphical Representation of Repository Virtual Drive
- 11.2.26 Deleting a Snapshot
- 11.3 Disabling MegaRAID Recovery
- 11.4 CacheCade Advanced Software
- 11.5 FastPath Advanced Software
- 11.6 LSI SafeStore Encryption Services
- 11.6.1 Enabling Drive Security using EKM
- 11.6.2 Supporting EKM Mode
- 11.6.3 Change Security Settings- LKM
- 11.6.4 Change Security Settings - EKM
- 11.6.5 Importing Foreign Drives
- 11.6.6 Importing Foreign Drives to LKM
- 11.6.7 Importing Foreign Drives to EKM
- 11.6.8 Importing Foreign Drives to EKM
- 11.6.9 Enabling Drive Security using LKM
- 11.6.10 Changing the Drive Security Settings
- 11.6.11 Disabling Drive Security
- 11.6.12 Importing or Clearing a Foreign Configuration
- 11.7 Managing Link Speed
- Events and Messages
- MegaCLI Error Messages
- Glossary
- History of Technical Changes
| Recognized languages: | English |
|---|---|
| Pages: | 12 |
| Size: | 501 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 72 |
| Size: | 3.77 MB |
Show table of contents
Document Outline
- MegaRAID® SAS Device Driver Installation
- Table of Contents
- Chapter 1: Overview
- Chapter 2: Windows Driver Installation
- 2.1 MegaRAID Primary Storage
- 2.2 Primary OS Storage on the MegaRAID Controller
- 2.3 Secondary Storage on the MegaRAID Controller with the Windows 2008 OS
- 2.4 Using the Device Manager to Install MegaRAID on the Windows 2008 OS
- 2.5 Installing a MegaRAID Driver on the Microsoft Windows 8 OS
- 2.6 Installing a MegaRAID Driver on the Windows Server 2012 Operating System
- Chapter 3: Red Hat Linux Driver Installation
- Chapter 4: SuSE Linux Enterprise Server (SLES) Driver Installation
- Chapter 5: Ubuntu Linux Driver Installation
- Chapter 6: FreeBSD Driver Installation
- 6.1 Avago MegaRAID Drivers and Software for the FreeBSD OS
- 6.2 Obtaining Avago FreeBSD Drivers
- 6.3 Creating a FreeBSD OS Driver Diskette
- 6.4 Installing the FreeBSD OS on Storage Managed by a MegaRAID Controller (Primary Storage)
- 6.5 Installing the Kernel Driver on a FreeBSD OS that Boots from a Device Not Managed by a MegaRAID Controller (Secondary Storage)
- 6.6 Updating Drivers in the FreeBSD System
- Chapter 7: VMware Driver Installation
- Chapter 8: Solaris Driver Installation
- 8.1 Contents of the Driver Distribution
- 8.2 Supported Hardware
- 8.3 Supported Operating Systems
- 8.4 Installing the Driver Package during OS Installation (Solaris10 OS, x86 Only)
- 8.5 Installing the Driver Package during Operating System Installation (Solaris11 OS, x86 Only)
- 8.6 Installing the Driver Package during Operating System Installation (Solaris11.1 OS, x86 Only)
- 8.7 Installing or Upgrading the Driver Package after Operating System Installation
- 8.8 Removing the Driver Package
- 8.9 Notes
- Chapter 9: XenServer Driver Installation
- Chapter 10: Debian Driver Installation
- Chapter 11: Oracle Enterprise Linux Driver Installation
- Chapter 12: Fedora Driver Installation
- Chapter 13: CentOS Driver Installation
- Chapter 14: OVM Driver Installation
- Appendix A: 240 VD Driver Support and Known Limitations
- Revision History