HP 600 - Manual (Page 11)

Quick start 3
Receive a fax
NOTE: One touch and speed dial locations must have been previously
programmed.
For more information, see Store a number in the phone book on page 20.
Receive a fax
How faxes are received depends on how the Answer Mode/Receive Mode is set.
For more information, see Set rings to answer on page 27.
FAX or TAM answer mode
The fax machine will answer the telephone, automatically detect fax tones, and
receive a fax.
TIP: However, if you accidentally answer the telephone and hear fax tones,
press the Start button to receive the fax.
AUTO answer mode
In AUTO mode the telephone rings for a certain number of rings (see Set rings to
answer on page 27), then switches to FAX receiving.
TEL answer mode
If the answer Mode is set to TEL, you must manually receive faxes.
1. Answer the telephone.
2. If you hear fax tones, press the Start button.
3. Once you hear fax tones from both machines (this may take several
seconds), you should hang up the telephone.
Make a copy
You can make multiple copies of a 10 page document.
Single copy—default settings
1. Turn the page face down and insert it into the document feeder.
2. Press Copy twice.