HP ISCSI SR2122 - Manual (Page 60)

SR2122 / Insight Manager 7 Service Pack 2 Integration
60 iSCSI SR2122 Storage Router: Getting Started Guide
If the user would like to see authentication traps (if users are speaking SNMP at the HP
SR2122, with an incorrect community string) then they configure it to be enabled.
Likewise, if you wish each Link state change to be sent as a trap, you must enable Link
up/Down for whichever Link you wish to monitor state changes with.
Configuring IM 7 SP2 to integrate with the SR2122
Discovering the HP SR2122
There are a number of ways that IM 7 can discover the SR2122:
Automatic Discovery
Using the Automatic Discovery page add the SR2122 Management port TCP/IP address to the
IP Address Range.
Figure 39: Automatic Discovery
Note: The Discovery filters have to be Disabled in order to allow the discovery of a network device
like the SR2122. By default IM 7 will be setup to only discover servers.