HP ISCSI SR2122 User Manual
Page 28
Serving Storage to the iSCSI Initiators from the SR2122 over IP
28
iSCSI SR2122 Storage Router: Getting Started Guide
SR2122> scsirouter iSCSI03_Disks password "none"
SR2122> scsirouter iSCSI03_Disks primary "none"
SR2122> scsirouter iSCSI03_Disks reserveproxy disable
SR2122> scsirouter iSCSI03_Disks failover secondary none
SR2122> scsirouter iSCSI03_Disks lun reset no
SR2122> scsirouter iSCSI03_Disks serverIf ge1
33.33.33.101/255.255.255.0 secondary ge2
SR2122> scsirouter iSCSI03_Disks target HSV23_T1 lun 1 wwpn
"50001fe150002f78" lun "1"
SR2122> scsirouter iSCSI03_Disks target HSV23_T1 lun 2 wwpn
"50001fe150002f78" lun "2”
SR2122> scsirouter iSCSI03_Disks target HSV23_T1 enabled
SR2122> scsirouter iSCSI03_Disks target HSV23_T1 accesslist "iSCSI03"
To display the SCSI router Instance information:
SR2122> show scsirouter "iSCSI03_Disks" all
Status Codes: A=active, I=inactive, C=create failed, D=not enabled, S=slave
CDB Proxy Pass Lun
Router Stat Retry Server Thru Reset Description
------------- ---- ----- -------- ---- ----- -----------
iSCSI03_Disks A 6 disabled no no Router Instance of all storage
for iSCSI03
SCSI Router Authentication Information
Router Authentication Username Password
---------- --------------- --------------- --------
iSCSI03_Disks none none none
Router ServerIf Vlan Vid IP/Netmask
Secondary TCP Port
---------- ---------- -------- -------------------------------- ----------
iSCSI03_Disks ge1 33.33.33.101/24 ge2 3260
Router Target Status Accesslist Targetid Description Profile
---------- ---------------- -------- ---------- ---------- ----------- -------
iSCSI03_Disks HSV23_T1 enabled iSCSI03 none (not set) High
Router Target WWPN Primary I/F WWPN Secondary I/F Alias
---------- ---------------- ---------------- ----- ---------------- ----- -----
iSCSI03_Disks HSV23_T1 none none
iqn.1986-03.com.hp:
fcgw.sr2122.3b6128603a94e42a2f66acd8a2601971.HSV23_T1
Router Target Lun WWPN Lun I/F WWPN Lun
I/F
---------- ---------------- ----- ---------------- ----- ----- ----------------
----- -----
iSCSI03_Disks HSV23_T1 1 50001fe150002f78 1 fc1 none
iSCSI03_Disks HSV23_T1 2 50001fe150002f78 2 fc1 none
Notice at the end of the command output that there are two LUN columns for each controller
WWPN entry. Because the SR2122 is issuing a target (HSV23_T1) over IP to the iSCSI
initiator, the iSCSI initiator needs a LUN value from the target.
The second LUN column is based on the LUN number received from the storage controller.
The two LUN numbers do not necessarily have to match.
Using the SR2122 GUI, a SCSI Router Instance is created from the Configuration screen
clicking on Add a SCSI Router. Enter the Instance name and description and click Add.