HP Vectra VL 5/xxx - Manual (Page 17)

English 5
1 Setting Up and Using Your PC
Connecting to a Network
Connecting to a Network
If your PC comes with a network connector, let your Network
Administrator know you are connecting your PC to the network.
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector.
To enable your network connection, refer to the Integrated Network
Interface Submenu in the Configuration Menu of the HP Setup
program. (You can find additional information in the online Network
Administrator’s Guide.)
NOTE If you need a BNC Coax connector to connect to the network, you can
install an optional BNC coax adapter (order HP D3979A). Refer to
"Installing a BNC Coax Adapter", on page 38.