Memory, Quickspecs – HP xw8200 User Manual

Page 15

E7525 chipset
DDR2 SDRAM ECC REGISTERED MEMORY
Memory must be added in pairs. This chart does not represent all possible memory configurations. The Intel E7525 chipset
supports ECC Registered 400 MHz (PC2-3200) DDR2 memory only.
DIMM socket 1 is the furthest from the Memory Controller Hub at the top of the board. Additional DIMM slots should be
populated consecutively; socket 2, 3, 4, etc. Speed mixing of memory DIMMs is not allowed. For efficient dual-channel
performance, each pair of DIMMs must be same size and same DRAM technology. If mixing single sided and double sided
memory, load the double sided DIMM pairs first. ECC Registered memory must be used.
If you have unused slots within a channel, chose the sockets closest to the memory controller (e.g. Sockets 7 & 8, then 5
and 6, and so on).

MAXIMUM MEMORY
Supports up to 16 GB of DDR2 SDRAM.

POSSIBLE MEMORY CONFIGURATIONS
Not all memory configurations possible are represented below.

DIMM Size

Slot

256 MB

512 MB

256 MB

1 GB

512 MB

1 GB

2 GB

1 GB

2 GB

512 MB

4 GB

1 GB

4 GB

512 MB

6 GB

1 GB

8 GB

1 GB

16 GB

2 GB

QuickSpecs

HP xw8200 Workstation

Memory

DA - 11976 Worldwide QuickSpecs — Version 42 — 5.25.2007

Page 15