HP ProLiant DL180 G - Manual (Page 12)

2 GB REG PC2-5300 2 x 1 GB Low Power Single Rank Kit 483399-B21
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit 408851-B21
4 GB REG PC2-5300 2 x 2 GB Single Rank Kit 461840-B21
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit 408853-B21
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit 408854-B21
Hard Drive Cage HP DL180 8HDD Cage FIO Kit 451368-B21
HP DL180 12HDD Cage FIO Kit 451369-B21
NOTE: The installation of a 12HDD Cage requires the addition of a 4-port SAS
controller that supports expanders. A Smart Array Controller, P400 or better, is
recommended.
NOTE: The addition of a Smart Array Controller (or 4-port SAS controller that
supports expanders) requires the addition a SAS/SATA Multi-lane cable
(464830-B21).
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory
integration. Please contact an HP sales representative for additional information.
QuickSpecs
HP ProLiant DL180 G5
Configuration Information - Factory Integrated Models
DA - 12903 Worldwide QuickSpecs — Version 8 — 5.16.2008 Page 12