HP ProLiant DL180 G - Manual

Front View: Rear View:
1. Access panel 1. Power Supply Cable Socket
2. Front LED Indicators 2. T-15/T-10 Screwdriver
3. Power on/off 3. Thumbscrew For Top Cover
4. Optional DVD-RW or DVD-ROM drive 4. Low Profile Card Slot
5. Front USB Ports (2) 5. PCI Expansion Card Slot
6. Non-Hot plug Non redundant fans (4 fans) 6. Thumbscrew For PCI Cage
7. Air Baffle 7. HP LO100c Management Card Port (Optional)
8. PCI Cage 8. LAN Port
9. System Board 9. 4 USB 2.0 Ports
10. UID LED Button
11. Serial Port
12. VGA Port
13. PS/2 Mouse Port (green)
14. PS/2 Keyboard Port (purple)
What's New
Support for 2 GB REG PC2-5300 2 x 1 GB Low Power Kit, single rank memory kit
At A Glance
The HP ProLiant DL180 G5 is a low cost high capacity storage optimized 2-way server, that delivers on a history of design
excellence and 2U density for a variety of rack deployments and applications.
Processors:
Supports up to two Quad-Core Intel® Xeon® processors: 5400 sequence
Quad-Core Intel® Xeon® processors 5400 sequence with 12MB Level 2 cache
Intel® 5100 Chipset
Memory:
Up to 16 GB of memory supported by six (6) PC2-5300 (667 MHz) DDR2 memory slots
Internal Drive Support:
Supports up to twelve via CTO with controller or up to eight via BTO:
Hot Plug Serial ATA (SATA) 3.5"hard drives; or
Hot Plug Serial Attached SCSI (SAS) 3.5"hard drives
NOTE: Hot Plug and SAS functionality requires the addition of Smart Array or HBA controller. 12 hard
drive support requires a 4-port SAS controller that supports expanders.
Internal storage capacity of up to 9TB (12 x 750GB Hot Plug 3.5" SATA hard drives), 3.6TB (12 x 300GB Hot
Plug 3.5" SAS hard drives)
Network Controller:
QuickSpecs
HP ProLiant DL180 G5
Overview
DA - 12903 Worldwide QuickSpecs — Version 8 — 5.16.2008 Page 1