HP ProLiant DL180 G - Manual (Page 10)

Four Drive Serial ATA (SATA) Models
NOTE: To upgrade from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives the addition of a storage
controller and one Internal SATA/SAS cable (464830-B21) are required. To upgrade to 8 Hot Plug SATA/SAS hard drives,
the addition of a storage controller and two Internal SATA/SAS cables (464830-B21) are required.
NOTE: To upgrade to server models supporting 12 hard drives; you must start with HP ProLiant DL180 CTO Chassis (P/N
457649-B21). Please see the Configuration To Order section below.
HP DL180 G5, E5420
2.50GHz,(QC) 1GB (1P)
456830-xx1
HP DL180 G5, E5405
2.00 GHz,(QC) 1GB (1P)
456831-xx1
Processor
One of the following
depending on model
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80 W, 1333 MHz
FSB)
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80 W, 1333 MHz
FSB)
Cache Memory
One of the following
depending on model
12MB (2 x 6MB) Level 2 cache (5400 sequence)
Memory
One of the following
depending on model
1GB (1 x 1GB) PC2-5300 DIMMs (DDR2-667)with Advanced ECC
capabilities
Network Controller One HP NC105i PCI-E (embedded)
Storage Controller Embedded SATA Raid Standard
Hard Drive None ship standard (up to 8 Hot Plug SATA or SAS drives supported
standard with the addition of a controller and cable. 12 drive models
supported via CTO only.)
Internal Storage BTO internal storage capacity of up to 6TB (8 x 750GB Hot Plug 3.5"
SATA hard drives), 2.4TB (8 x 300GB Hot Plug 3.5" SAS hard drives)
Optical Drive DVD-ROM, DVD RW (Optional)
Form Factor Rack (2U)
NOTE: Server models supporting 4 hard drives are Non-Hot Pluggable.
Smart Array Controller must be added for Hot Plug drive capability.
NOTE: SAS (Serial Attach SCSI) capability requires the addition of a
Smart Array or HBA Controller card.
Country Code Key xx = 00 U.S.
xx = 20 Brazil
xx = 29 Japan
xx = 37 APD
xx = 42 Europe
xx = AA PRC
QuickSpecs
HP ProLiant DL180 G5
Models
DA - 12903 Worldwide QuickSpecs — Version 8 — 5.16.2008 Page 10