Color mixing, Cmy color, Tri color – High End Systems SHOWGUN User Manual
Page 47

CHAPTER 4
Fixture Programming
SHOWGUN
®
User Manual
35
Color Mixing
The SHOWGUN
®
fixture has two color mixing systems. A CMY system that is comprised of a
dichroic color mixing system for output from the Output Lens and a RGB color mixing system that
is comprised of 36 RGB Modules in the LED Tracking system.
CMY Color
The CMY color mixing system creates and infinite range of color by moving pairs of Cyan, Magenta
and Yellow flags. Several color selection modes are available in either full speed (controller
crossfading the wheel positions), or MSpeed (MSpeed control of the wheel motor). For more
information on MSpeed, see MSpeed (Motor Speed) on page 38.
The Color Function you choose will effect which parameter values are available for each individual
color (Cyan, Magenta, and Yellow). The following table describes the Color Functions available on
the SHOWGUN fixture.
Color Function
Description
Continuous
Allows exact positioning at any point on the color wheel
Random
Selects whole color positions at variable speeds
Cycle
Cycles through colors
Tri-Color, single flag
Controls movement of one flag of a pair with the other flag open
Tri-Color, dual flag
Controls movement of one flag of a pair with the other flag closed (fully
saturated)
Tri Color
Independent control over individual flags in each color pair allows you to create tri-color beam
effects. You can choose whether to control one or both flags of a pair.
Flag 1
Flag 2
SINGLE FLAG MODE
DUAL FLAG MODE
0
100%
Flag 1
Flag 2
127-128
254-255
50%