High End Systems SHOWGUN - Manual (Page 46)

CHAPTER 4
Fixture Programming
34 SHOWGUN ® User Manual
SHOWGUN ® DMX Parameters
DMX console libraries define parameters for the following SHOWGUN functions over a 30-channel
range and are copyrighted and available in High End Systems consoles. For information on
developing libraries for DMX consoles from other manufacturers, contact High End Systems.
Channel Function Channel Function
1
Pan
16 Iris
2 17 Shutter/Lamp Functions
3
Tilt
18 Shutter
4 19 Dimmer
5 Color Function 20 MSpeed
6 Cyan 21 Macro
7 Magenta 22 Control
8 Yellow 23 LED Tracking Dim
9 Litho Wheel Position 24 LED Tracking Function
10 Litho Rotate Function 25
LED Tracking Red
11
Litho Rotate
26
12 27
LED Tracking Green
13 Soft Edge 28
14 Zoom 29
LED Tracking Blue
15 Focus 30
Pan and Tilt
The Pan and Tilt parameters control the SHOWGUN fixture’s 420° pan range and 216° tilt range.
Pan and Tilt functions each utilize two channels to provide 16 bit adjustment to a fraction of a
degree.
Pan and Tilt motion for SHOWGUN fixtures can be controlled with MSpeed values, (see MSpeed
(Motor Speed) on page 38). If you choose to use MSpeed for gobo changes without affecting Pan
and Tilt parameters, set Pan/Tilt MSpeed OFF in the Control parameter.
Note: Optical encoders for pan and tilt correct the fixture’s position if the fixture is
jarred from its programmed position. If a physical obstruction prevents the
fixture from correcting its position, the fixture “times out” to prevent wear on the
motors. If your fixture has timed out, remove the obstruction and home the
fixture to return it to normal operation.