HP 3500 - Manual (Page 152)

Control panel message Description Recommended action
RELOAD TRAY X
TRNSPRNCY
alternates with
Verify transparency
meets specification
The transparency currently loaded might
not be supported.
CAUTION
Use only transparencies specified for use
with HP Color LaserJetprinters. Non-
compatible transparencies can damage
the printer. See the HP LaserJet Printer
Family Print Media Specification Guide.
1. Remove all non-compatible
transparencies from Tray X.
2. Load compatible transparencies in
Tray 1.
See Printing on special media for more
information.
REMOVE ALL
PRINT CARTRIDGES
alternates with
To exit press
Cancel Job key
The printer is executing a Component
Test. Remove all print cartridges.
After diagnostics are complete, reinstall
all print cartridges.
REMOVE AT LEAST ONE
PRINT CARTRIDGE
alternates with
To exit press
Cancel Job key
The printer is executing a Disable
Cartridge Check or Component Test. Remove one print cartridge.
After the test is complete, reinstall the
print cartridge.
REPLACE
CARTRIDGE
alternates with
For help press ?
The identified print cartridge has reached
the end of life. Printing will not continue
until the cartridge is replaced. Press for help.
or
See Changing print cartridges or
Replacing supplies and parts for more
information.
See Supplies and accessories for more
information.
REPLACE
CARTRIDGE
alternates with
To continue press .
The identified print cartridge is nearing
the end of its useful life and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP. To override,
press . 1. Order the identified print cartridge.
2. Press to continue.
or
Press for help.
See Supplies and accessories for more
information.
REPLACE FUSER KIT
For help press ?
The fuser kit is at end of life. Press for help.
or
See Replacing the fuser and pickup roller
for more information.
See Supplies and accessories for more
information.
140 Chapter 8 Problemsolving ENWW