Quickspecs, Step 5: select wall outlet power cords – HP Hewlett-Packard BladeSystem Enclosure c3000 User Manual

Page 17

Step 5: Select Wall Outlet Power Cords

(For connection to standard wall outlets)

NOTE:

NOTE: Select one wall outlet power cord for each power supply when plugging the power supplies into a wall outlet.
NOTE:

NOTE:

NOTE: Wall Outlet power cords should only be used with low-line (100v to 110V) power sources. If high-line power outlets are
required, safety regulations require the use of a PDU or a UPS between the c3000 enclosures power supplies and wall outlets.
NOTE:

NOTE:

NOTE: A standard PDU power cord(c13 to C14) is included with each AC power supply, so these wall outlet power cords are not
required if you plan to plug the power supplies into a PDU or UPS.

Order the appropriate power cord for your countries standard electrical outlets.

Order the appropriate power cord for your countries standard electrical outlets.
Wall Outlet Power Cords

Wall Outlet Power Cords

Wall Outlet Power Cords Nema 5-15P to IEC320-C13, low voltage (6 ft/2 m), North America

NOTE:

NOTE: HP Power cord (6 ft) 1.83 meter 10A C-13-UL domestic power cord, for
grounded USA 110V wall outlets.

AF556A

Power Cord, C13,10A , 1.83m, Japan

NOTE:

NOTE: HP Power cord 2 meter C13 Japan low-line power cord, for Japanese 100V
wall outlets.

AF572A

Power Cord, C20 C13, 15A, Universal Jumper, 2m

NOTE:

NOTE: For use with PDUs accepting C20 power cords.

AF590A

QuickSpecs

HP BladeSystem c3000 Enclosure

Configuration Information Factory Integrated Models

DA - 12790 Worldwide — Version 12 — July 14, 2008

Page 17