Hitachi 32HDT20 - Manual (Page 46)

AUDIO
47
Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
Audio Source
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving
a weak stereo broadcast or 2nd Audio Prog (SAP) which may be a secondary language, weather report, etc.
The sources received will be displayed at the top left edge of the TV. The source you select will be displayed above the sources
received. See example below for each selection when both stereo and second audio are received (monaural is always received).
Press THUMB STICK
̆
,
̄
,
̇
,
̈
to highlight a function. Press down on the THUMB STICK to select the function setting. When the
function has a “•” in the circle or a check ( ✓ ) in the box, it is ON.
Advanced
Settings
THUMB
STICK
SELECT
Audio
Move SEL Return
Advanced Settings
Sound Enhancement
Balance
Bass
Treble
Audio
Audio Source
Stereo
Mono 2nd Audio Prog.
Internal Speakers
ON
Off Advanced Settings
Move SEL Select Auto Noise Cancel
Perfect Volume
50%
50%
L R
Internal Speaker
This function is useful when setting up the external speakers. If you prefer to use only speakers from a separate stereo system, turn
this feature OFF. When set to OFF, the Plasma TV speakers and the sub-woofer output are OFF.
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio
for that channel.
Perfect Volume
This function will automatically adjust volume so each channel and input has the same average volume level.
ANT A 31
NEWS
10:00 PM
ANT A 31
NEWS
10:00 PM
STEREO SELECTED SAP SELECTED
MONO SELECTED
STEREO
ST/SA
ANT A 31
NEWS
10:00 PM
SAP
ST/SA
MONO