Huffy M731321 - Manual (Page 27)

27 11/05 ID# M731321
15.
24
24
Roll completed assembly to desired position. Fill tank with water (approx. 30 gallons/115
Liters) or sand (approx. 300 lbs./136 kg) and snap cap (24) in place.
Peel protective
film from surface
of acrylic
backboard prior
to use.
NOTE:
ADD TWO GALLONS (7.6 LITERS) OF
NON-TOXIC ANTIFREEZE IN SUB-
FREEZING CLIMATES.
SAND SAND
(300 lb.) (300 lb.)
(136 kg) (136 kg)
NOTE:
IF USING SAND:
2 GALLONS OF
ANTI-FREEZE IS
NOT REQUIRED
CAUTION
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
DO NOT LEAVE ASSEMBLY
UNATTENDED WHEN EMPTY;
IT MAY TIP OVER.
WARNING!