HP CC450 - Manual (Page 68)

64
Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
Press 1. Menu button to launch the Record/Playback
Menu.
Use the 2. or keys to switch the menu tab to Setup menu.
Use the 3. or keys to move through the menu selections.
To select an item, press the 4. OK button or key.
Change the submenu settings using the 4-way navigation control. 5.
Press the 6. OK button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
From the Setup menu, select 1. Sounds.
Adjusts sound settings. 2.
Press the 3. OK button to apply changes.
Item Available Settings Description
Startup Sound 1, Sound 2, Sound 3, Off Selects the startup sound when camera is turned on.
Shutter On, Off
Enables or disables shutter sound when Shutter button is pressed.
Shutter sound is not available when recording movies or voice
clips.
Beep
Volume
0-4 Adjusts volume.